The Accurate Reloading Forums
Looking for a gunbuilder

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/212107564

17 April 2006, 10:27
LRH270
Looking for a gunbuilder
Who could install a barrel liner (or re-barrel) a 20 guage o/u (Ruger, Browning, ???) into a combination 20 ga/9.3x74R. Including adding sights, scope base, other required incidentals.

Anybody done this or have a recommendation?


______________________

RMEF Life Member
SCI
DRSS
Chapuis 9,3/9,3 + 20/20
Simson 12/12/9,3
Zoli 7x57R/12
Kreighoff .470/.470

We band of 9,3ers!

The Few. The Pissed. The Taxpayers.

17 April 2006, 17:37
jeffeosso
You might consider going to
http://www.cdnninvestments.com/dowournewcat.html

they were selling the tikka/valmet/eaa OU ...

if you could settle on one barrel each, you could probably have a PAIR of guns for under 1000...

iirc, they had 30-06 OR 7x57Rx12ga for under 400

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com