The Accurate Reloading Forums
REMINGTON 458 WIN MAG

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/20410554

28 November 2002, 22:58
<buford1>
REMINGTON 458 WIN MAG
I purchased a REM MDL 700 BDL left handed rifle.In 458 WIN MAG The reason I bought it was the price was right. Cant get a accurate apraisel of rifle took it to the remington dealer they told me it was custom built rifle. Had either a douglas or kriegoff barrel but couldnt tell me more unless they disassembled the rifle. No way, they did say, who ever did it, did a excellent job. How can I find a fair market value of this gun. The stock is georgeous.It shames my WBYS mark 5 deluxes. 3 mounths after I bought it I found a pre 64 WIN super grade 458 WIN so I have no use for the left handed rifle. I look like a monkey playing with a foot ball trying to shoot it.

[ 11-28-2002, 13:59: Message edited by: buford1 ]
29 November 2002, 04:10
Jim Kobe
Take a look in "The Blue Book" of gun values. I have a 700 BDL 458 win mag custom shop factory rifle for sale with gorgeous wood, all original and unfired for $1025, but it is not going away so I guess it is priced too high. Any offers?
29 November 2002, 05:10
GeorgeS
Buford,

No offense, but LH push-feed .458s are not very desirable. Righties can't use them, most lefties don't need a .458, and most lefties who need a .458 will build one on a lefthand M-70 or M-77 CRF action.

You can go one of two ways:
1) find a 700 take-off .338Win.Mag., re-barrel and sell the gun for $600; or,
2) sell the gun for a bit more than what a used factory BDL sells for.

Sorry for the bad news.
George
21 December 2002, 10:44
Hammer
Always need another left-hand big bore. How much money do ya'll need for your left-hand Remington 700 458 ?
21 December 2002, 11:20
HunterJim
I would convert the rifle to .458 Lott, and then sell it.

jim dodd
21 December 2002, 11:27
GeorgeS
Buford,

Check the barrel. If it has all the Remington rollmarks, it may or may not be a Custom Shop gun. You may be able to check its origin with Remington.

If it doesn't have Remington rollmarks, it was re-barreled after purchase.

George
26 December 2002, 18:41
Hammer
While it does not make it controlled feed, will the Sako extractor replacement improve the situation for using a Remington 700 as a DGR ?