The Accurate Reloading Forums
Marlin 60

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/2041016321

03 January 2010, 07:54
hatsfield
Marlin 60
fishing hey guys took apart a Marlin 60 22 long semi to be cleaned put it all back together can not get the triger to in gage after i push the release triger will then ingage does anyone have any ideals thanks and happy new years
03 January 2010, 08:30
Westpac
Are you one of the original Hatfields?

How far did you take it apart? What do you mean you can not get the triger to ingage? Do you have any pictures?


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
03 January 2010, 09:14
hatsfield
quote:
Originally posted by hatsfield:
Yes I am, took the barrel off the stock and pulled the plastic triger off cleaned out the barrel and just cleaned around rhe parts did not fully take it apart that is the mechanizm put it back together and nothing. And dont have pictures sorry, unless I have moved a spring I dont thank so but may be just was hopeing that I was instaling the triger wrong but I tryed it different ways and still nothing so I put it way for tonight I sure thank you for your responce the triger will ingage but only after i pull the release

03 January 2010, 11:35
Westpac
What is the release you are talking about?


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
03 January 2010, 21:02
hatsfield
good morning sir you pull the hammer back and their is a little flat piece that hangs out on the left front of the triger push it and it closes the hammer I was just calling it a release.
03 January 2010, 21:39
Westpac
That is what it's suppose to do. That little part is the sear. You pull the bolt handle back to cock the hammer and you push the sear forward to release it and that fires the gun. When the barreled action is in the stock the trigger is supposed to line up with that little flat piece so that when you pull on the trigger, it releases the hammer and the gun fires. Unless the safety is on, or, the trigger itself is broken.

So what part of this is it not doing?


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
03 January 2010, 22:19
hatsfield
Hey Wespack took it all back apart redone it and guss just was not holding my mouth right works great thanks for all your help and have a great day some time you just need to go back and stsrt over HA!!!!!!!!!!!!
04 January 2010, 00:23
hatsfield
Whent out chamber a few rounds everythang went well thanks wunt to wish you a happy new years
04 January 2010, 01:01
Westpac
Happy New Year!


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.