THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Pe-64 model 70 Hornet-to-.222 conversion help
 Login/Join
 
One of Us
posted
I picked up a pre-64 model 70 that someone previously rechambered to .222 Remington. They removed the factory Hornet followe, spring and box and replaced with a new spring. Actually shoots pretty well, but will not consistently feed .222 from the magazine. Can someone recommend a gunsmith who has previously had success with these conversions? Many thanks
 
Posts: 238 | Location: San Antonio, TX USA | Registered: 04 March 2003Reply With Quote
One of Us
posted Hide Post
I had one that fed very nice. It had a Rem 722 mag box and follower.


PA Bear Hunter, NRA Benefactor
 
Posts: 1625 | Location: Potter County, Pennsylvania | Registered: 22 June 2005Reply With Quote
One of Us
posted Hide Post
Kind of a pity as the 22H was quite rare in pre64 and it is certainly a novelty. I'm sure there was a good reason but still... sorry I added no value.
 
Posts: 691 | Location: JOHANNESBURG, SOUTH AFRICA | Registered: 17 January 2013Reply With Quote
One of Us
posted Hide Post
You might check with Griffin & Howe. Back when the .222 first appeared they used to advertise that conversion in the American Rifleman.
 
Posts: 1748 | Registered: 27 March 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia