30 December 2003, 14:39
prairiebomberBest varmint cal. that fits a mod 70 .308 action.
I have access to a good shape mod 70 in .308. I already shoot a 6.5x55 and a 30-378wby. and would like to build an excellent long range varmint rifle,but yet easy enough to reload.??????. any suggestions.
P.S. this gun will only have maybe 200 rounds tops fired through it a year.
30 December 2003, 15:41
GeorgeS.243 Ackley Improved 40 degree shoulder.
George
30 December 2003, 15:51
FjoldIf I was going to do only 200 rounds a year, I would go for an overbore that you could really load the snot out of. Something like a 1:8 twist 22/243 and load the 75-80 grain bullets in or a 1:10 twist 6mm/284 loaded with 70-85 grain varmint bullets. This way nothing you can see is out of range.
I think that you'll probably wind up shoot more as you get to liking it, and then you can change the burned out barrel for a 22/250 or something.
30 December 2003, 16:07
bartsche Twist it to handle the 85gr + varmint bullets.
30 December 2003, 17:12
Savage99.220 Swift, 26" sporter weight SS barrel 1-12 twist.
I had a pre 64 M 70 rebarreled to .220 Swift. It's perfect in every way. I now prefer it to the .243 Win. I can see the bullets hit, it shoots flatter, less richocets and maybe less noise.
31 December 2003, 15:25
Bill LeeperMy first choice would be a 6mm Remington. I think I would use a 12 twist barrel for use with 85gr bullets. A 10 twist will alow you to use 100s if you want to. 107s require an 8.
My first choice in a 22 cal would be the 22-250. I am not a fan of overbore wildcats simply because they seldom perform to expectations and if they do it's not for long because the barrel is gone in short order.
I really like the 220 Swift but the semi-rimmed case can create some feeding problems.
Another 22 which works very well is the 22BR. Because it is so short some mag mods may be necessary but it comes awfully close to the 22-250 in performance. Regards, Bill
31 December 2003, 16:57
Alberta CanuckIf I was going to shoot it a lot, I'd probably buy another bolt, build a .223 Remington,and put a brake on it so I could "spot" all my own shots.
If I wanted something hot and thought I might end up selling it some day relatively soon (a year or two), I'd probably open the existing bolt face to make a .223 or .243 WSM...a rifle chambered for a new factory cartridge always sells relatively easily on the used market.
If I was going to keep it possibly forever and only shoot at relatively rare targets (20-30 shots per day of hunting) like woodchucks, rock-chucks, etc., I'd go with one of: the 6-BR with a 1-in-8 or 9" twist, a .220 swift with a 1-in-12" twist, or a 6 m/m Remington with a 1-in-9" twist.
I've made the 500 yard club on p-dogs lots of times with the .223 though, so would likely just go there and use a 1-in-8 twist with 75-80 gr. bullets if I wanted to pot any and all small critters within 600-700 yards. May take 2 or 3 shots to walk the bullet on in the prairie winds, but most of those critters don't shoot back and I don't have to hit every single one I shoot at for it to be fun.
Pick what looks good for you at the distances and for the sizes of varmints you shoot at. There isn't any "perfect for everything" round.
AC
That's been done. I also have a number of mod.98 single shots in full magnum length cartridges. But I must admitt you are on your toes. 
roger