THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Hogue Rifle stocks
 Login/Join
 
One of Us
posted
I am looking at a Hougue stock for my ruger 300mag and I was wondering if they are any good? I have an older style ruger synthetic stock on it and it bangs me up pretty good. I would like to hear some comeents on them from someone that has used one. Thanks
 
Posts: 201 | Location: MICHIGAN | Registered: 24 February 2004Reply With Quote
one of us
Picture of dempsey
posted Hide Post
I think they're pretty good for the money. Sorta heavy but I like the feel of the surface. The one I bought rubbed hard on one side of the barrel. I should have returned it but instead tried to correct the problem. I can't cut wood straight, rubber was a nightmare Mad Other than that I thought it was ok.


______________________
Always remember you're
unique, just like everyone else.

 
Posts: 6205 | Location: Cascade, MT | Registered: 12 February 2002Reply With Quote
one of us
posted Hide Post
I've have one, I like it. I think they are good bang for the buck.


Billy,

High in the shoulder

(we band of bubbas)
 
Posts: 1868 | Location: League City, Texas | Registered: 11 April 2003Reply With Quote
one of us
Picture of mix3006
posted Hide Post
A good utility stock.The drop in fit is BS,it took a bit a mucking around to fit a Supergrade action into.I had the action glass bedded and the barrel floated in it.Mine is only pillar bedded and it shoots really well.
 
Posts: 191 | Location: Wollongong NSW Australia | Registered: 25 August 2004Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Dempsey,

Hogue stocks the overmolded version which is the rubber coated are actually 1 lb lighter than most other stocks. Typical stock weight is 2.9 lbs hogues are 1.9 lbs.

Andy - I like them and I would suggest the getting the full length bedding block version.


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10169 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
one of us
Picture of dempsey
posted Hide Post
I'll have to weigh it. The first thing I noticed over the factory wood was weight, at least thought I noticed.


______________________
Always remember you're
unique, just like everyone else.

 
Posts: 6205 | Location: Cascade, MT | Registered: 12 February 2002Reply With Quote
Moderator

Picture of Mark
posted Hide Post
To fit the barrel glue a piece of 120 grit sandpaper to a suitable dowel and sand away. The technical guy there told me that when I called asking which stock would be best for my Shilen #5 contour. He talked me into getting the small barrel channel and enlarging it to fit precisely, I'm glad he did as it looks nice.

Like Mike I also have the full bedding block version but if you are not shooting varmints with it I think the regular one would be fine, and $100 cheaper.


for every hour in front of the computer you should have 3 hours outside
 
Posts: 7777 | Location: Between 2 rivers, Middle USA | Registered: 19 August 2000Reply With Quote
Moderator
posted Hide Post
Would they hold up to the recoil of something like a .375 H&H ?

Regards,

Pete
 
Posts: 5684 | Location: North Wales UK | Registered: 22 May 2002Reply With Quote
one of us
posted Hide Post
I run a pillar bedded model on my Rem .375 without any problems...
 
Posts: 105 | Location: CO | Registered: 15 November 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia