Reamer making, and some dimesion related questions.

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/180103246

18 March 2007, 19:32

Tumppi-

Reamer making, and some dimesion related questions.

Hello everyone

Im thinking to do some reamers, mainly by quide which Doble Troble has made.
Equipment available are basic homeshop machinery, lathe, mill, indexing stuff etc..

Any book recommends or general tips?

I have some pfd's from C.I.P and wondering if it also possibel to use these dimensions to mill reamers?

Example:
[img=http://img337.imageshack.us/img337/851/500jzl6.th.jpg]

Best Regards

Tumppi

19 March 2007, 01:19

Mark

A good book for a lot of gunsmithing info is James Howes "Modern Gunsmith". I see it is also on a CD now, which is better than nothing but seems to be perpetually on EBAY. Also, see if your local library can get it.

for every hour in front of the computer you should have 3 hours outside

19 March 2007, 01:22

Mark

P.S. Welcome to the forums! I hope you have an enjoyable time here, and learn a lot to boot!

for every hour in front of the computer you should have 3 hours outside