THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Fixing loose claw mount
 Login/Join
 
new member
posted
I have a Mannlicher-Schoenauer Model 1950 with claw mounts, double slot up front with base dovetailed into a boss over rifle chamber and single slot rear screwed to reciever just above the bolt release. Problem is the mount is not tight when latched with some movement up-down and slight movement fore-aft and left-right at the rear. Front fit is good with only slight fore-aft movement. I feel that all movement could be eliminted by adding metal to the rear claw and/or slot and refitting, but I am no expert on claw mounts and wonder if there is someone out there who could do this repair? Any help would be appreciated.
 
Posts: 5 | Location: Alabama | Registered: 01 June 2005Reply With Quote
one of us
posted Hide Post
 
Posts: 1693 | Location: East Coast | Registered: 06 January 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia