One of Us
| A man whom does ral nice barrel jobs,and doesn,t charge an arm and leg and has a 3 day turn around is mr. Mel Doyle,he lives in St Marie ,Idaho. his email is madjrd7@earthlink.net. tell him van from yuba city sent you. |
| | | Posts: 442 | Location: Idaho | Registered: 16 December 2005 | 
IP
|
|
One of Us
| Thanks for the info and leads.. |
| | | Posts: 395 | Location: West Coast | Registered: 09 April 2005 |
IP
|
|
one of us
| Since the CZ 550 is regularly available in 416 Rigby, the same basic case dimensions as the 378 Wthby case, there should be no problem opening it up. I would try and start with one originally chambered for 416 as the bolt might work without having to open it up. Also the mag box should be pretty close to the right dimensions. |
| | | Posts: 1680 | Location: Colorado, USA | Registered: 11 November 2002 |
IP
|
|
One of Us
| quote: Originally posted by congomike:
Since the CZ 550 is regularly available in 416 Rigby, the same basic case dimensions as the 378 Wthby case, there should be no problem opening it up. I would try and start with one originally chambered for 416 as the bolt might work without having to open it up. Also the mag box should be pretty close to the right dimensions.
Wow, I wasn't aware that they were offering them in 416 Rigby! 30-378 would be really easy off of one originally chambered in 416 Rigby. Good luck! |
| | | Posts: 86 | Location: Wyoming | Registered: 17 January 2006 |
IP
|
|
one of us
| The 375H&H CZ's work good for the RUM based cartridges however  And yes, they offer them in 416 Rigby as well. |
| | | Posts: 2124 | Location: Whittemore, MI, USA | Registered: 07 March 2002 |
IP
|
|
