THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Semi-auto cleaning?
 Login/Join
 
one of us
Picture of Tanoose
posted
How does one remove the action(bolt) from a remington 750 or 7400 for through cleaning or is there a trick to cleaning the entire bolt while still in the receiver?
 
Posts: 869 | Location: Bellerose,NY USA | Registered: 27 July 2001Reply With Quote
one of us
posted Hide Post
The easiest way is to just flush it out with a spray cleaner. If it is not too bad one of the cleaners that leaves some powdered lube behind like Hornady's works good.
If the action is really sandy or gungy, I spray it with Breakfree and let it soak for a while, then I flush it out with Gun Scrubber, which takes out all the oil. I repeat this step if necessary until the action is clean and free of debris. Then I spray it with the Hornady or similar. If there any areai I want to oil or grease in the action I do it now.

I do the same for lever actions , pumps etc. Saves wear and tear of taking them down, loosing parts CRYBABY and the HORROR of ASSEMBLE IN REVERSE ORDER. Eeker


DOUBLE RIFLE SHOOTERS SOCIETY
 
Posts: 16134 | Location: Texas | Registered: 06 April 2002Reply With Quote
one of us
Picture of Tanoose
posted Hide Post
Thanks NE
 
Posts: 869 | Location: Bellerose,NY USA | Registered: 27 July 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia