THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Contour Dimensions: Winch. Featherweight??
 Login/Join
 
Jordan
one of us
posted
Can anyone post contour dimensions for a Winchester featherweight barrel in .30 caliber? I presume it is a straight taper after the step down in front of the action. Am I correct?

Thanks,


Jordan
 
Posts: 3478 | Location: Northern California | Registered: 15 December 2003Reply With Quote
M1Tanker
one of us
Picture of M1Tanker
posted Hide Post
Try here: http://riflebarrels.com/products/factory_contours.pdf

I was referred there for a Rem Ti contour and they had what I needed. The M70 FW is listed also.


William Berger

True courage is being scared to death but saddling up anyway. - John Wayne

The courageous may not live forever, but the timid do not live at all.
 
Posts: 3155 | Location: Rigby, ID | Registered: 20 March 2004Reply With Quote
Jordan
one of us
posted Hide Post
Thanks William. I appreciate that.


Jordan Smiler
 
Posts: 3478 | Location: Northern California | Registered: 15 December 2003Reply With Quote
<9.3x62>
posted
The Douglas FW barrel is a copy of the Winchester FW barrel

http://www.benchrest.com/douglas/dimensions.html

That would also be a source (with drawing) that may help...
 
Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia