THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Sako Extractor
 Login/Join
 
one of us
posted
What are your opinions of installing a Sako type extractor on the Remington bolt?

Jerry
 
Posts: 1507 | Location: Dayton, Wyoming | Registered: 11 March 2004Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
It's a solution to a non-problem. I do quite a few of them each year, but have never done one on a 700 bolt that actually needed it.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
The remington model 700is the basis for the M40 US Military Sniper rifle...do they put a sako extractor in that?


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10162 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
quote:
Originally posted by Mike_Dettorre:
The remington model 700is the basis for the M40 US Military Sniper rifle...do they put a sako extractor in that?


No. Where no viable replacement extractor exists for guns such as the Rem 721 etc, then the Sako, the Howa/Vanguard and M16 are a good, relatively inexpensive option.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
One of Us
posted Hide Post
Personally, I think it can aid accuracy in a PROPERLY blueprinted action. It is also done quite a bit when wanting to changer bolt face size when the client doesn't or can't get a replacement bolt.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5531 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
posted Hide Post
Any advantage to the M16 extractor over Sako?obviously larger,easier to find-any harder to install etc?
 
Posts: 877 | Location: Louisiana | Registered: 03 June 2005Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
quote:
Originally posted by KimR:
Any advantage to the M16 extractor over Sako?obviously larger,easier to find-any harder to install etc?


I don't see any real advantage of one over the other. Both provide an equal area of grip. They utilize a different means of providing spring tension, with the M16 and Howa/Vanguard styles being direct whereas the Sako is more passive.

The M16 and Howa/Vanguard types are more difficult to install because of the extremely critical placement of the extractors pivot pin.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia