THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Who can bob the hammer spur of a Ruger SP101
 Login/Join
 
One of Us
posted
I need the hammer spur of my SP101 bobbed - but not removed completely.

Results wanted include:
- Revolver's default trigger mode becomes double action.
- Spur's nub allows revolver to still be retained by thumb break strap and/or conventional safety strap.

Having Ruger replace my spurred hammer with an SP101 spurless hammer is not a solution accounting for both results.

Please identify gunsmiths who do this.


It's so simple to be wise. Just think of something stupid to say and then don't say it. Sam Levinson
 
Posts: 1519 | Location: Seeley Lake | Registered: 21 November 2007Reply With Quote
One of Us
posted Hide Post
Pull the hammer our of the frame.
Grind/Blend/Polish to your hearts content.

After all it is a POS....cast Ruger!


Keep'em in the X ring,
DAN

www.accu-tig.com
 
Posts: 430 | Location: Fairbanks,AK. | Registered: 30 October 2008Reply With Quote
one of us
posted Hide Post
Id grind it all the way off and polish that part..It will work fine with a strap without leaving a bump that looks icky to the practiced eye..Any smith worth his salt can do that in 30 minutes.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42209 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Cast Ruger indeed; some of the strongest gun parts made by any method. Not sure why the slam.
Anyway, it is child's play to do what you want; if you do not want to fire up your angle grinder, PM me.
 
Posts: 17371 | Location: USA | Registered: 02 August 2009Reply With Quote
one of us
posted Hide Post
quote:
After all it is a POS....cast Ruger!


Ruger makes some of the strongest handguns out there.
 
Posts: 19702 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
posted Hide Post
One time backI saw my 'smith working on a Ruger Redhawk(?) in .454. Seems the owner had fired five additional rounds AFTER the first one failed to exit the barrel. Gun was still in one piece without any visible bulges. Projectiles appeared to be jacketed hp's.
 
Posts: 148 | Location: back in the USA | Registered: 28 April 2002Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by dpcd:
Cast Ruger indeed; some of the strongest gun parts made by any method. Not sure why the slam.
Anyway, it is child's play to do what you want; if you do not want to fire up your angle grinder, PM me.


Indeed. Ruger pioneered lost investiture casting. Well known and contracted by many companies. You must be thinking of cast iron. No comparison.
 
Posts: 3823 | Location: SC,USA | Registered: 07 March 2002Reply With Quote
one of us
posted Hide Post
It's " investment casting " .A very old process but with modern improvements and modern alloys it is a fantastic process.
History ? Hundreds of years ago in Europe the expert was an Italian named Cellini. Then called "lost wax process " When he saw the work of the new world metallurgists , places like Peru, he said " compared to them I know nothing " !
 
Posts: 7636 | Registered: 10 October 2002Reply With Quote
One of Us
posted Hide Post
The same when the Europeans first came to Benin City in Nigeria where my wife comes from. And its named for Benin bronzes.

They arrogantly believed that the "bronzes" were the lost works of Ancient Greek traders as "Africans" surely couldn't have such skills!
 
Posts: 6823 | Location: United Kingdom | Registered: 18 November 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia