THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
New toys for big boys
 Login/Join
 
One of Us
posted
Grabbed a laser scanner from a friend last year and just used it to build a replacement external hammer for a shotgun using the existing hammer as a pattern. Lots of computer work and a big learning curve but I think future projects will go much faster. Added flood coolant to my Haas Tm-1.....huge improvement in milling and a huge mess in the shop to match.



 
Posts: 3770 | Location: Boulder Colorado | Registered: 27 February 2004Reply With Quote
one of us
Picture of Toomany Tools
posted Hide Post
Beats making it with files! Too cool.


John Farner

If you haven't, please join the NRA!
 
Posts: 2949 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
One of Us
posted Hide Post
Nice work Steve ! The prep work and learning curve for such work can never be fully conveyed through pictures alone.
 
Posts: 239 | Location: Southeast USA | Registered: 01 August 2014Reply With Quote
one of us
posted Hide Post
Just think about leaving the left side door open on the VMC enclosure, and after about 10 min of that 1/2 hp coolant pump working , then you have a big mess to deal with.

I only have done that once.

But feel your pain.

J Wisner
 
Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia