THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Rattlecan Duracoat
 Login/Join
 
One of Us
Picture of richj
posted
Buddy is trying a can of Duracoat on an SPS M700.
What you see took a whole can.



 
Posts: 6526 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
Picture of Clayman
posted Hide Post
Pretty cool. I have a beater slug gun I coated last year on a whim. I am not lying when I say the results have been really impressive! Massive and fastidious surface prep are an absolute must, but I was able to coat the entire slug gun, a Ruger 22/45, some other random gun parts, and a machete blade with an entire can. Probably two coats on everything, too. Hey, for the $30 it costs, it's hard to go wrong.


_____________________________________________________
No safe queens!
 
Posts: 1225 | Location: Gilbertsville, PA | Registered: 08 December 2005Reply With Quote
One of Us
Picture of richj
posted Hide Post
more

 
Posts: 6526 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Try Brownells Alumihyde; it is air cure and takes a few days to cure but it is pretty durable for a low cost.
 
Posts: 17386 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
Picture of lee440
posted Hide Post
Richj, what preps do you use on the scope tube, aluminum, I presume, to promote adhesion?


DRSS(We Band of Bubba's Div.)
N.R.A (Life)
T.S.R.A (Life)
D.S.C.
 
Posts: 2276 | Location: Texas | Registered: 18 May 2004Reply With Quote
One of Us
Picture of richj
posted Hide Post
Wet Sanded everything. The Leupold finish is very tough. There were a few spots on the stock that weren't perfect. My buddy is OCD, he went back and sanded the stock and metal for another coat.

He runs a collision shop and is a very good painter.
 
Posts: 6526 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
posted Hide Post
Hijack:

DCPD:
How does the alumihyde stuff work on steel?
I have a can, but, used it on aluminum and haven't tried it on steel.

Thanks,
George


"Gun Control is NOT about Guns'
"It's about Control!!"
Join the NRA today!"

LM: NRA, DAV,

George L. Dwight
 
Posts: 6068 | Location: Pueblo, CO | Registered: 31 January 2006Reply With Quote
One of Us
posted Hide Post
Alumihyde will take very well to steel. Bead blast it, or rough it up with sanding. Have done several rifles with it. It can take a beating, and stands up to aggressive bore cleaners as well. Takes about a week of 90 degrees temp to fully cure. Good stuff !!


Hang on TITE !!
 
Posts: 582 | Registered: 19 August 2004Reply With Quote
One of Us
Picture of richj
posted Hide Post
I'm 90% sure the scope is alumihyde. I did it many years ago.



 
Posts: 6526 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
posted Hide Post
Duracoat is tough stuff when applied properly. You should let it cure for a couple of weeks if possible.
 
Posts: 2173 | Location: NORTHWEST NEW MEXICO, USA | Registered: 05 March 2008Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I don't know why they are called alumihyde because of course, all these products are just paint; and will stick to any properly prepared surface, steel, wood, aluminum. Trick is to get the surface oil free and as rough as you can. Blasting with aluminum oxide is best. The bake on types can be use immediately whilst the air dry ones take days to cure,, as stated above. I have used most all of them from the old Gun Coat, to Duracoat, Cerakote, Alumihyde one and two.
 
Posts: 17386 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
Picture of richj
posted Hide Post
Done. All duracoat paint 2 colors. theres a lot going on in there.


and redone





 
Posts: 6526 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia