THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Savage 99 rebarrel
 Login/Join
 
one of us
posted
How much of a job would it be to rebarrel a savage 99, say in 300 savage or 308 to a 358 Winchester?
 
Posts: 253 | Location: Alaska | Registered: 22 May 2003Reply With Quote
one of us
posted Hide Post
The 308 should be easy. the 300 very hard. there was a tread posted a while ago on this with lots of andswers.
 
Posts: 19712 | Location: wis | Registered: 21 April 2001Reply With Quote
one of us
posted Hide Post
There may be an action length difference between 300 Savage guns and 308's. I have read that the spool is another problem when changing calibers.

There is a Savage collectors section at www.24hourcampfire.com

Call Savage on the phone. Maybe someone there will suggest a way.
 
Posts: 5543 | Registered: 09 December 2002Reply With Quote
one of us
posted Hide Post
You have to start with a .308, the .300 mechanism and magazine are too short. Also, a .308 can be rebored to .358, a little cheaper than rebarreling as you keep the original blue job and sights, etc.
 
Posts: 1233 | Registered: 25 November 2002Reply With Quote
one of us
Picture of CLL
posted Hide Post
I called Savage to have them rebarrel My wife's .243 . The only thing they were concerned about was the serial number I guess some of the older 99's they wont touch . Long story short I had the gun work done and it really shoots . Good Luck Hope you get what your looking for .
 
Posts: 200 | Location: CA,U.S.A. | Registered: 14 March 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia