THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Need to know
 Login/Join
 
One of Us
posted
I have a client wanting to build a rifle with a MRC short action in left hand. Seeing as he wants to save a few bucks, he wants the stock inletted from a pattern. Does anyone know of anyone who has a pattern. It is not cost effective to build a pattern for one stock.

Jim


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
one of us
posted Hide Post
Jim, I don't know if this is what you are looking for, but Richards Micro lists it on their available actions list
RMF actions list
 
Posts: 496 | Location: ME | Registered: 08 May 2003Reply With Quote
One of Us
posted Hide Post
Ed Shulin in Trinidad CO. has the MRC patterns.
 
Posts: 85 | Location: Oklahoma | Registered: 14 May 2004Reply With Quote
one of us
posted Hide Post
Jim, the guys at Serengeti have the patterns as well, perhaps they'd share with you......
 
Posts: 3563 | Location: GA, USA | Registered: 02 August 2004Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Sooner:
Ed Shulin in Trinidad CO. has the MRC patterns.


WOuld you have a contact number for Ed?


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
posted Hide Post
You could check with Tim R up in Wirt (Northwood gunstocks). I dropped a short and a long MRC 1999 action off in November. He was going to bed them for a pattern stock and mill out some bastogne stocks for me this spring. One was a left, but I can't remember if it was the short or long. It should not matter, I think the bottom is symetric and he can just leave the bolt cut to be done by hand.

He has a variety of pattern stocks, including the Winchester patterns. He has the duplicator and patterns from a place in California, I think it was Richards or Royal (of Microbed fame, not the current Richards Microfit). If you ask, may be it will get him going on mine.

Roger
 
Posts: 254 | Location: Northern Minnesota | Registered: 20 January 2005Reply With Quote
one of us
posted Hide Post
Ed Shuelen 719-846-2301
 
Posts: 4821 | Location: Idaho/North Mex. | Registered: 12 June 2002Reply With Quote
one of us
Picture of triggerguard1
posted Hide Post
quote:
Originally posted by Jim Kobe:
I have a client wanting to build a rifle with a MRC short action in left hand. Seeing as he wants to save a few bucks, he wants the stock inletted from a pattern. Does anyone know of anyone who has a pattern. It is not cost effective to build a pattern for one stock.

Jim


You might also try Dennis Olsen in Plains, Montana. I'm pretty sure he's done up a few of the MRC receivers and he does pretty good work too. Prices are real reasonable.


Williams Machine Works

 
Posts: 1021 | Location: Prineville, OR 97754 | Registered: 14 July 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia