Go | New | Find | Notify | Tools | Reply |
One of Us |
I recently purchased an old style Mark X .300 Win Mag in like new condition. But there is a problem with the iron sights. New condition also, but way off. Front sight is too high and rear sight cannot be adjusted because the screws will not turn. First question. Did these use to come with iron sights? 2nd question. What loosens loctite? Heat? Some sort of chemical? Or? Thank you. Happy Christmas season to all. KJK | ||
|
One of Us |
Yes. Heat. Turns it to powder. | |||
|
one of us |
I hope no one would use loctite on sight adjustment screws. Locktite = Heat Gun Correct screw driver? some of these came with Williams front & rear sights. Used to be lots of different height front blades avaliable. Merry Christmas! | |||
|
One of Us |
Heat gun too weak and slow for me. Propane torch. Willians sights are crap anyway. | |||
|
One of Us |
Or a soldering iron on the screw head. | |||
|
one of us |
| |||
|
One of Us |
When the locktite gets hot enough to break loose, you will be able to smell it. | |||
|
one of us |
I use a small propane torch as used by cooks, has a tiny flame, fits a firearm screw 6/48, 8/40s and larger. Ive also heated a screwdriver red hot, held it in the screw head with light but firm pressure. you can feel the locktite, fiberglass, whatever break loose.. Good for emergency use in the field.. Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia