Weatherby Accumark Trigger ??

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/109108067

12 November 2007, 18:54

hglass

Weatherby Accumark Trigger ??

I want to replace the Weatherby trigger with a Timney trigger. I like a 2 1/2 to 2 3/4 lb trigger. I also find with the factory trigger there is to much over travel. Has anyone else done this and if so was there much of an approvement

12 November 2007, 19:15

Westpac

Nothing wrong with the factory trigger. They are fairly easy to get to break at 2.5 lbs. A clean, consistant and jar free 1.5 lb pull isn't out of the realm with these triggers when properly reworked. And if you have a light touch, you won't notice any over travel.

_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.

12 November 2007, 19:21

Heat

I have no problems or issues with my Accumark trigger. I have it set fairly light but not to the sub 3 lb range. They can be "worked" to lessen the pull as well as the overtravel... Make no mistake however, the Timney triggers are EXCELLENT....

Ken....

"The trouble with our liberal friends is not that they are ignorant, but that they know so much that isn't so. " - Ronald Reagan

13 November 2007, 07:15

Big Bore Boar Hunter

I have a good trigger on my Accumark set to 3 lbs. I think it would be cheaper and easier to have the MKV trigger reworked than installing a Timney.

John