THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    do you like reverse slope (Weatherby style) combs on rifles?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
do you like reverse slope (Weatherby style) combs on rifles?
 Login/Join
 
one of us
posted
I have a stock that was made for VERY low iorn ssites. I stuck a comb raising stick-on rubber thing on it and it sure helps. i also have a couple of comb raisers that are reversed sloped, ie the comb nose is lower than the comb at the rear of the cheekpiece.

I have never shot a rifle with a reverse slope combe and was wondering what your opinion was about felt recoil. The pad on the rifle is pretty low in relation to the bore, but the pitch is perfect and it is a great fit on my shoulder. Was just wondering what it would be like if I peeled off the straight comb raiser and put one of the others on it

Thanks!
 
Posts: 2509 | Location: Kisatchie National Forest, LA | Registered: 20 October 2004Reply With Quote
Moderator

Picture of Mark
posted Hide Post
They work OK provided you inlet a bunch of fake ivory diamonds into the stock first.

Kidding aside, what is the gun chambered in? IMHO the advantage of a reverse comb is you don't get smacked in the cheek by recoil as much but my experiences were formed many many years ago when I was a kid shooting rifles that belonged to family friends, and that was when even an '06 was a handful.


for every hour in front of the computer you should have 3 hours outside
 
Posts: 7776 | Location: Between 2 rivers, Middle USA | Registered: 19 August 2000Reply With Quote
One of Us
Picture of Tapper2
posted Hide Post
The forward sloping comb is IMHO a good way to remove pain from recoil. We don't mind the recoil, it's the pain we don't want.....Tom


SCI lifer
NRA Patron
DRSS
DSC
 
Posts: 654 | Location: Denver, Iowa | Registered: 10 June 2009Reply With Quote
One of Us
Picture of Rusty
posted Hide Post
I personally like these kinds of Weatherby stocks.


Sorry could not resist! Big Grin


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
one of us
posted Hide Post
I have owned two Weatherby's in my life, one .460 and on in .378. I found those two rifles the "gentlest" (if you can even use that word for that recoil level cartridge) recoiling rifles I have shot in cartidges of that level.
 
Posts: 1675 | Location: Colorado, USA | Registered: 11 November 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    do you like reverse slope (Weatherby style) combs on rifles?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia