02 January 2009, 20:30
FbullHelp With Devcon mixing ratio
Could someone please explain the mixing ratio on Devcon plastic steel? The ratio is stated at 9:1 by weight; 2.5:1 by volume. I understand the difference between the wheight and volume measurements. But could you please tell the which is the epoxy and which is the hardener? I assume the hardener is the lesser of the two. Just want to make sure - Thanks
Happy New Year
02 January 2009, 20:37
WestpacThe epoxy is always listed first, followed by the hardner.
02 January 2009, 22:06
pointblankThe hardener is the white compound, and the epoxy is the grey/black compound..
02 January 2009, 22:50
Doc224/375I don't know of any plural mixing ratios that are not more resin too hardener by ratio .
Even when listed as 1:1 the hardener content of say product B is far less than equal .
There are generally far more solvent carriers in part B .
Devcon Plastic Steel
Hardness, Shore D 85.0 ASTM D2240
Tensile Strength, Ultimate 3220 psi ASTM D638
Modulus of Elasticity 850 ksi In Tension; ASTM D638
Flexural Yield Strength 5600 psi ASTM D790
Compressive Yield Strength 8260 psi ASTM D695
Shear Strength 2800 psi Adhesive tensile shear strength; ASTM D1002
Mix Ratio by Volume 2.5 to 1 resin:hardener
Mix Ratio by Weight 9 to 1 resin:hardener
Product Comparisons can be made for Epoxy resins and several different adhesives such as
Anaerobic Methacrylate Urethane Cyanoacrylate and many more
Just click the below link bookmark it for quick references in the future .
http://www.ellsworth.com/itwdevcon.html?tab=Vendors