I have an RCBS powder measure stand (PMS). I put threaded inserts into my bench under the scale stand. and used thumbscrews to secure it.

I wanted to convert this to LNL. The Hornady stand is about $50 but I don't know if it would have fit under the scale.

I bought the LNL conversion kit and cut up some scrap maple and angle brackets. The hole for the conversion kit is a bit larger than 1 3/16 so I used a 1" drum sander to enlarge the hole.

It looks like a hack but it works.









The dillon insert to the left is there to set drop charge for the dillon PM .

Doesn't look like a hack to me.