THE ACCURATERELOADING.COM LONG RANGE SHOOTING FORUM


Moderators: MS Hitman
Go
New
Find
Notify
Tools
Reply
  
Long Distance Triggers
 Login/Join
 
one of us
posted
I'll split this into Target Shooting and Hunting.

Question:
What Pull Weight do you prefer for a Target Rifle?

Choices:
1. 4oz or less.
2. 4.1-8oz.
3. 8.1-12oz.
4. 12.1-16oz.
5. More.
6. I don't shoot Target Rifles.
7. Other?

Question:
What Pull Weight do you prefer for a Hunting Rifle?

Choices:
8. 1# or less.
9. 1.1-2#.
10. 2.1-3#
11. 3.1-4#
12. 4.1-5#
13. 5.1-6#
14. I don't shoot Hunting Rifles.
15. Other?

Question:
What kind of Trigger do you "Primarily" use?

Choices:
16. Factory stock, just as it came out of the box.
17. A well Tuned and Adjusted Factory Trigger.
18. An Aftermarket Trigger.
19. Other?

Question:
Do you "Change the Pull Weight" depending on the Temperature?

Choices:
20. Yes, Lower in warm weather, Higher in cold.
21. No, once it is Set I leave it alone.
22. Other?

 
 
Posts: 9920 | Location: Carolinas, USA | Registered: 22 April 2001Reply With QuoteReport This Post
One of Us
posted Hide Post
I like the triggers on all my rifles to be the same whether I hunt with them or shoot targets. Around 1.5#'s is great.

If your rifle has a stock trigger that can be worked, do it.

Aftermarket triggers are great.
 
Posts: 3427 | Registered: 05 August 2008Reply With QuoteReport This Post
One of Us
posted Hide Post
For hunting rifles like them at 3lbs and usually able to safely adjust to that level other than lever guns. Match rifles have used Shilen, Jewell, and Rem.40X and std. 700 triggers. I don't care for less than 2lb plus triggers on my match rifles for my style of match shooting. The sight picture w/ micrometer sights can change in a moments notice and with much lighter than even 2.5lbs. you don't have a chance of holding up and regrouping with a super light trigger. Ability to "hold up" and insure good sight picture with two stage trigger is big plus for me. Take up the slack, sight picture looks good, press it.
Not two stage, but have an old Rem.700 XC rifle with std. factory tuned trigger and it's put off many a round and breaks like glass and very dependable so far. Been working pretty well since early 70's.
 
Posts: 1328 | Location: West Virginia | Registered: 19 January 2009Reply With QuoteReport This Post
One of Us
Picture of Ghubert
posted Hide Post
Well you left out set triggers! Mad

I like a 6 oz trigger on a target rifle but because of various competition rules end up shooting with the "standard military pull weight" of 3 1/2lbs.

This is where a set trigger comes in handy as one can practice for than and have the option of a 4-8oz trigger available.

The finest target triggers I have even used have been on Anschutz and Walther match .22 rifles, not centre-fire trigger I have used has even come close, with the exception of the Anschutz trigger conversions for various target actions, but they seem to die pretty quickly in use.

For a hunting rifle I like a reasonably crisp and clean 2lb break, whether this comes from a capable factory unit, like Tikka, Sako, Parker hale or Sauer, or from an after market unit.

Changing pull weight for temperature is one of the ways to hell, eventually one has so much to think about that the shooting itself suffers. Maybe if I shot heavy bench.
 
Posts: 11731 | Location: London, UK | Registered: 02 September 2007Reply With QuoteReport This Post
One of Us
posted Hide Post
From the polls it looks like most like one thing but use something else.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With QuoteReport This Post
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia