My Remington 40-XB in 260 Remington. Simply fantastic with 139 Lapuas.

Here's my .338-.378 Weatherby. It has a 28-inch Shilen barrel and a chamber without freebore. It shoots 225-grain Nosler Accubonds at 3,330 fps. The scope is a 4.5-14X Leupold with range compensating dots by Premier Reticles with the main crosshairs zeroed at 300 yards and dots for 400, 500, 600, 700 and 800 yards. It's accounted for a lot of deer, ten at over 700 yards.

Received this a couple of days ago. 6MM BR.

700 Action. Gary Eliseo kit. Built by Ken Porter.

New 26" brux barrel in 7WSM:



specs:
http://forums.accuratereloadin...051025751#5051025751

Rem 700 SA, Mcm HTG, Badger bottom metal, 308 Win 18,5 inches LW barrel 1-12, threaded for a Atec moderator,

was out testing the rifle with a Hensoldt 4-16 on top, out to about 500 meters it was doing about MOA in spread, the 500 meter plate was a 25x25 cm Hardox plate. the 155 A-max did smack them small plates with a great deal of authority.

/Chris

/Chris

What load do you use for that 155AMAX? I like 47grs RE15, Win brass, CCIBR primers, 2.850" oal.

a couple more handcannons
1> 6.5x284 HS Precision

2. XP-100 284 Win


nmhunter

Finally got most of her together. Started with garbage black stock. Found this stock in a local shop...$50.00, Vais muzzle brake, Remington barrel, 5.5-22x56 NXS w/Zero Stop and 2xturrets, NPR-1. Eventually will get a McMillan A-5 and a bipod. But for now this satisfies my budget.

I just re coated the stock on this one a couple of weeks ago. My 338 Rum with a Sako TRG-S Action and a 10 twist 27 inch finish #4 Lilja barrel. The scope is a Konus Tac 30 4-16x40 30mm tube.

.260 Rem
Stiller Predator Action
Brux #4 finished at 24", w/ interrupted fluting.
McMillan Remington Hunter, flame pattern, white to med gray to dark gray, flush cups on non-bolt side.
Wyatt 3" magazine box
PT&G Bottom Metal
Shilen Trigger
Zeiss Conquest 4.5-14 w/ target turrets.

John