All bullet's are to order.......


I can make a 100 grain .510 if you like although it would look alot like a washer Rather then a bullet...

I can also make a 1500 grain .510 if you like ..But you would more then likly need a 50 BMG

I make bullet's in



.308
.357
.358
.366
.375
.400
.403
.405
.411
.416
.423
.458
.510

Starting next year i will be coming out with solid's that are swaged not turned...From Copper rod stock.

In .510 and .458 and .423 and .416 also in any weight you would like them


Pottsy

PM me for detail's and ordering ....

as i don't think Saeed like's for me to use his board for my own sale's site..........

I started making jacketed bullet's in 1964 around Sept.

I stopped making bullet's in 1977 i just now started up again --PA Bullet's--
I started off making bullet's in .357 and .358
80% of the bullet's i made were 200 grain Keath nosed .357 Diam for hand gun's
the rest were were mostly sold to people with 35 Reminton's
semiauto's ..I made a few ( 50 ) for my uncle Bob Ray

In .375 for his 375 H&H When he took his only trip to Africa in 1972 ..he killed two cape's and a number of other small game.

The bullet's i made for him did not turn out to be the greatest thing the guide had to finish off both Cape's

Yes i do make bullet's and thay are made to order in my 10 % deg taper design you pick the weight and the jacket wall thickness you also pick hollow point or soft nose

If your looking for some other point/meplat design for your
.510 Draw it out with all the spec's taper /meplat/ogive /etc and sent it to me i will look it over and let you know the cost for the redsign .
any redesign is a 100.00 cost over and above the normal cost
of the bullet's

I can make bullet's with jacket's up to a wall thickness
to your desire or atleast up to 0.950

Shipping to those from Down under ? i will check and see .. your more then likly looking at atleast 20.00 shipping bulk rate for an order of 50.. 525 grain bullet's plus the cost of the bullet's 37.80 US fund's but don't quote me on the shipping as i really have not looked into it or the reg's about shipping oversea's


Pottsy

I don't put cannelure mark's on the bullet's

you will need to buy a cannelure tool if you want the marking's on the bullet's

Martin I don't care if you high jack the therad mate

So you make Jacketed bullets ??

What would sea mail shipping cost I wonder ??