THE ACCURATERELOADING.COM LEVER ACTION RIFLE FORUM

Go
New
Find
Notify
Tools
Reply
  
32 Win Special
 Login/Join
 
one of us
posted
I have a friend that has a very nice 32 Win Special in Model 94 Winchester. It has had a rubber pad installed and a receiver sight so it is not a collector's gun. It has been shot very little and shows only minor wear on Wood and metal. Does anyone have an idea of what a fair price would be for this gun?
 
Posts: 890 | Registered: 27 February 2003Reply With Quote
<Henry McCann>
posted
$300 to $400 in my neck of the woods...Western Montana. If it's pre-64! I'm not sure Winchester made the .32 Specials past 64.

But if it's a post 64 gun than $175 to $200 at the most.
 
Reply With Quote
one of us
posted Hide Post
Per Fjestaad, the post 1964 M-94's started at S/N "2700000".
 
Posts: 299 | Location: Yucaipa CA | Registered: 21 December 2002Reply With Quote
one of us
posted Hide Post
It will be a pre 64 as the 32 Spec. was discontinued before 1964....In mint condition it will bring about $600 but with any use at all it drops in value greatly...I would venture to say without actually seeing your gun that $300 would be a very good price...
 
Posts: 42298 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
new member
posted Hide Post
I have a .32 Special myself. The earlier reply of about $300 to $400 for a pre '94 seems reasonable. The caliber is excellent with cast bullets due to its 16 inch twist...find the right cast bullet shooter and you might do a bit better.

Several sources show the .32 Special was not discontinued until 1973. Here's a link to one on the '94 history:

http://www.galleryofguns.com/Shootingtimes/Articles/DisplayArticles.asp?ID=2


If you want to know the year of manufacture...check out the following address:


http://oldguns.net/cgi-bin/f2f/f2f.pl?http://oldguns.net/sn_php/winmods.htm
 
Posts: 3 | Location: Great Falls | Registered: 22 August 2003Reply With Quote
new member
posted Hide Post
Correction to my earlier post.

Should have read "pre-64" not "pre-94". Likely you've already figured that out, but thought I'd better correct it.
 
Posts: 3 | Location: Great Falls | Registered: 22 August 2003Reply With Quote
one of us
Picture of RSY
posted Hide Post
Quote:

Correction to my earlier post.

Should have read "pre-64" not "pre-94". Likely you've already figured that out, but thought I'd better correct it.




Next time, just click "EDIT" on your original post to make any needed corrections/alterations.

RSY
 
Posts: 785 | Location: Central Texas | Registered: 01 October 2001Reply With Quote
one of us
Picture of C1PNR
posted Hide Post
I've got to say that I prefer the way Weatherman did the correction. Let the first post stand and make a correction later.

We can then see what happened, rather than saying later "did I see this? or was it that?"
 
Posts: 312 | Location: SW Idaho | Registered: 02 January 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia