The Accurate Reloading Forums
+P++ 450 Marlin in the BLR

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/8721043/m/4011095012

01 May 2015, 10:00
.366torque
+P++ 450 Marlin in the BLR
I want to load up some Cast Performance 460 grain WLN LBT GCs in my SS BLR. I want them be 1900 or so.
Real Guns can hit 1810, from a Win 94.
02 May 2015, 06:32
Coloradoyaler
Hello 366T

I believe 1900+fps is possible.

What I have seen is the gun won't feed the 460 Cast. As a final note speeding up the hard cast actually reduces penetration.
02 May 2015, 09:37
prof242
I've hit 2250fps with 400gr jacketed bullets in my BLR, but I have never used cast bullets in it. Did you have your rifle throated out? How about using WSM magazines? These are two things I did to get the power I wanted from the .450 Marlin cartridge in my BLR.


.395 Family Member
DRSS, po' boy member
Political correctness is nothing but liberal enforced censorship
04 May 2015, 17:20
Coloradoyaler
Prof242

What 400gr bullet did you get to feed?

Thanks
Mark
05 May 2015, 01:58
prof242
I was using Cutting Edge Bullets. Accuracy is what really surprised me.


.395 Family Member
DRSS, po' boy member
Political correctness is nothing but liberal enforced censorship
08 May 2015, 08:19
.366torque
Thanks guys! I'm going to try IMR 4227. Testing will be next week. Work keeps getting in the way of my life.
Also going to have a go with Barnes TTSX 300 grainer. I'll use 3031 or 4198 with that one.
09 May 2015, 09:42
prof242
If you will give me the exact length of the bullet and the seating depth you will be using, I will run it through QuickLoad to get you a starting load using 4227 and 4198 powders.


.395 Family Member
DRSS, po' boy member
Political correctness is nothing but liberal enforced censorship
11 May 2015, 18:59
.366torque
quote:
Originally posted by prof242:
If you will give me the exact length of the bullet and the seating depth you will be using, I will run it through QuickLoad to get you a starting load using 4227 and 4198 powders.


Thank you! I'll get on that. My days off just started.
12 May 2015, 00:38
mete
I use 300 factory Barnes in my 45-70 giving about 1900 .Work very well within 100 yds on deer up to 350 lbs .Probably beyond that weight and distance too.
25 June 2015, 08:49
.366torque
Scrapped it. It doesn't have the panache of an 86 or 71.
Going to get my dream rifle. I've always wanted a Winchester 71, or reasonable facsimile, in 450 Alaskan. I made the mistake of reading Wildcats volume 1 & 2.
I have dies, Jamison 348 brass, now need rifle and reamer.

I also have a Siamese Mauser in pristine shape, but, that's for another forum.
26 June 2015, 20:19
Mikelravy
Dang mete, 350lb deer! I wanna go!
26 June 2015, 20:47
Bill73
I have been playing with a newer win71 that I had converted to the 450 Alaskan,I am shooting 400 gr bullets @ 2200 fps,pretty happy with it,350's gave me 2400 fps,loaded with the right bullet I think it will do well on everything except maybe the real big stuff like Cape Buff or Elephant.


DRSS
27 June 2015, 02:21
.366torque
quote:
Originally posted by Bill73:
I have been playing with a newer win71 that I had converted to the 450 Alaskan,I am shooting 400 gr bullets @ 2200 fps,pretty happy with it,350's gave me 2400 fps,loaded with the right bullet I think it will do well on everything except maybe the real big stuff like Cape Buff or Elephant.


How long is the barrel?
28 June 2015, 22:06
Bill73
24 inches,in fact I have another rifle being built in 416/348 improved,it will be interesting to see what I get for velocity with 26" barrels & 400 gr bullets.


DRSS