THE ACCURATERELOADING.COM RIMFIRE FORUM


Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
Info on a Welhrauch 17 HMR
 Login/Join
 
one of us
Picture of BigBullet
posted
All,

I have recently acquired a Welhrauch 17 HMR. The import stamp is an LLC from Florida and their website does not provide and information. It is made in Germany.

Not knowing anything about the rifle I purchased it because it appears to be of a very good quality, has a match type trigger, adult size stock with decent figure and checkering. The top of the receiver is drilled and tapped for bases, but I cannot find any, luckily it also has a standard 3/8" groove for the scope ring to attach.

Can anyone tell me about this rifle. Its quality reminds me a Sako or Anschutz level. Your comments are appeciated.

Thank you,
John


BigBullet

"Half the FUN of the travel is the esthetic of LOSTNESS" Ray Bradbury
https://www.facebook.com/Natal...443607135825/?ref=hl
 
Posts: 1224 | Location: Lorraine, NY New York's little piece of frozen tundra | Registered: 05 July 2003Reply With Quote
one of us
posted Hide Post
John,

On their website you'll have to click on Technical Details to see which models are made in the various chamberings. Would appear you've got a model HW66J?

I'm only familiar with the HW66's, Hunting Match Rifles; which some of my friends have in either 22 Hornet or 222 Remington, either in the magazine version or single-shot. They are EXCELLENT value & super accurate; especially the Stainless Steel barreled versions.

My Buddies all use 3/8" groove mounts since they're inexpensive and will easily handle the Hornet & .222 Rem. recoil level. Last two we put the rimfire mounts from Sinclair International on them and they're holding up just fine. I'm sure you can find some really spendy European Mounts for the Weihrauchs but we've decided to go the other way 'round and use American mounts.

http://www.weihrauch-sport.de/englisch/e_startseite/e_index.htm


Cheers,

Number 10
 
Posts: 3433 | Location: Frankfurt, Germany | Registered: 23 December 2004Reply With Quote
one of us
Picture of BigBullet
posted Hide Post
Gerry,

Thank you for the link. It appears I have a HW 60 J with a single trigger. Again, thank you for the information;

John


BigBullet

"Half the FUN of the travel is the esthetic of LOSTNESS" Ray Bradbury
https://www.facebook.com/Natal...443607135825/?ref=hl
 
Posts: 1224 | Location: Lorraine, NY New York's little piece of frozen tundra | Registered: 05 July 2003Reply With Quote
one of us
posted Hide Post
Big John.....

You're welcome - I obviously was having a brain fart with "66", you're correct; it would be a HW60J vice the HW66J.

Enjoy your new "little" Boomer, my 17HMR is the Savage 93 L/H and I really like it.


Cheers,

Number 10
 
Posts: 3433 | Location: Frankfurt, Germany | Registered: 23 December 2004Reply With Quote
One of Us
posted Hide Post
I have a HW66 Jin .222 Rem and I absolutely love the rifle. It's not the most beautifull (it's kind of stubby looking), but it has a great trigger, fits me like glove and is superbly accurate.


Proud DRSS member
 
Posts: 282 | Registered: 05 February 2007Reply With Quote
one of us
posted Hide Post
Night.....

The stock appearance sorta grows on ya. The Three-Position Stock is made for shooting DJV or German Hunting Shooting Competition. For this purpose it is a superb design. The events are the Fox Target (Prone) Roe Buck Target (Standing Supported, from a Pole) Wild Boar Target (Off-Hand) and a 40 or 50 Meter Running Boar; the two distances compensated for by two different sizes of Targets.


Cheers,

Number 10
 
Posts: 3433 | Location: Frankfurt, Germany | Registered: 23 December 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia