THE ACCURATERELOADING.COM RIMFIRE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Shooting  Hop To Forums  Rim Fire Rifles & Pistols    Model 60 Marlin/Rem factory waranty work.

Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
Model 60 Marlin/Rem factory waranty work.
 Login/Join
 
One of Us
Picture of TEANCUM
posted
I bought a model 60 blued with the laminated stock and was getting used to it after putting a scope on it. It started to have troubles with the bolt not closing completely, failure to extract, and firing out of battery. The last problem was a real attention getter.

I called the service center in NY and after explaining the firing out of battery I could sense their concern. They emailed me a prepaid label and they had the rifle in shop for 3 days. It just came back from New York and the only time consuming factor was the back and forth from Idaho to NY on UPS.

The rifle came back with the note that they cleaned and oiled the chamber and replace the action as the previous one was "broke". The action in those model 60s is the guts of the whole rifle. I was concerned about what they would charge if anything and the whole project came back with a NC under warranty as the rifle was about 4 months old to me.

Very impressed with the service and now off to see if I can re-sight in the rifle and get some decent groups in this cold snap.
 
Posts: 1788 | Location: IDAHO | Registered: 12 February 2005Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by TEANCUM:
I bought a model 60 blued with the laminated stock and was getting used to it after putting a scope on it. It started to have troubles with the bolt not closing completely, failure to extract, and firing out of battery. The last problem was a real attention getter.

I called the service center in NY and after explaining the firing out of battery I could sense their concern. They emailed me a prepaid label and they had the rifle in shop for 3 days. It just came back from New York and the only time consuming factor was the back and forth from Idaho to NY on UPS.

The rifle came back with the note that they cleaned and oiled the chamber and replace the action as the previous one was "broke". The action in those model 60s is the guts of the whole rifle. I was concerned about what they would charge if anything and the whole project came back with a NC under warranty as the rifle was about 4 months old to me.

Very impressed with the service and now off to see if I can re-sight in the rifle and get some decent groups in this cold snap.


My model 60 likes nice ammunition, Lapua and Eley work a lot better than bulk-packed anything. I have the impression that a model 60 is not a cheap date...


TomP

Our country, right or wrong. When right, to be kept right, when wrong to be put right.

Carl Schurz (1829 - 1906)
 
Posts: 14940 | Location: Moreno Valley CA USA | Registered: 20 November 2000Reply With Quote
One of Us
posted Hide Post
My Model 60 eats up inexpensive ammo just fine. Shooting target grade ammo through it is a total waste of money, IMHO. Keep an eye on the recoil spring; it needs to be replaced regularly if you shoot much.
 
Posts: 366 | Registered: 30 November 2006Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Shootshellz:
My Model 60 eats up inexpensive ammo just fine. Shooting target grade ammo through it is a total waste of money, IMHO. Keep an eye on the recoil spring; it needs to be replaced regularly if you shoot much.


By "working" I mean smaller groups; it rarely fails to function. Marlin has had a long time to work the bugs out of the model 60.


TomP

Our country, right or wrong. When right, to be kept right, when wrong to be put right.

Carl Schurz (1829 - 1906)
 
Posts: 14940 | Location: Moreno Valley CA USA | Registered: 20 November 2000Reply With Quote
One of Us
Picture of TEANCUM
posted Hide Post
quote:
Originally posted by Shootshellz:
My Model 60 eats up inexpensive ammo just fine. Shooting target grade ammo through it is a total waste of money, IMHO. Keep an eye on the recoil spring; it needs to be replaced regularly if you shoot much.


Thanks for the heads up. I'm new to the Marlin rimfire world and would not have thought to check on that down the road.

My rimfire rifle experience has been limited to many 10/22's.
 
Posts: 1788 | Location: IDAHO | Registered: 12 February 2005Reply With Quote
one of us
posted Hide Post
Now that I think about it, I once had to go find a small part to fix a Marlin bolt-action 22 RF. I went to the New Haven plant to ask about it, and after a few minutes a machinist came out and handed me one (no charge). Can't complain...


TomP

Our country, right or wrong. When right, to be kept right, when wrong to be put right.

Carl Schurz (1829 - 1906)
 
Posts: 14940 | Location: Moreno Valley CA USA | Registered: 20 November 2000Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Shooting  Hop To Forums  Rim Fire Rifles & Pistols    Model 60 Marlin/Rem factory waranty work.

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia