If you know anything about the first generation Mdl 52-B trigger will you please look at my post in the "Gunsmithing" Forum. I removed the trigger and re-installed it after a re-barrel job and it fires after I set the safety, pull the trigger and then push the safety into the fire position. This was done as a function test and I didn't do this test before I started the work.

Thanks for your time and advise,Joe

I have the exact same problem with mine, any help would be appreciated.

quote:

Originally posted by EASRCO:
I have the exact same problem with mine, any help would be appreciated.

You might check over @ the below site.

Winchester 52 Forum:
http://www.rimfirecentral.com/...rumdisplay.php?f=265