Go | New | Find | Notify | Tools | Reply |
One of Us |
Wanting to get a custom bolt handle checkered on a nearly complete 1909 Argentine. The checkered bolt handles I have had done in the past were 36-40 lines per inch. I am looking for a rifle builder/metal specialist or engraver that enjoys bolt checkering for fill in work between their larger projects. Anyone have any recommendations? | ||
|
One of Us |
Bruce Farman. | |||
|
One of Us |
Thank you Tom. I found his contact info on the ACGG site | |||
|
One of Us |
Max McFarland is in a class of his own for this work | |||
|
One of Us |
Thanks Duane! | |||
|
One of Us |
Google it and a name will come up; Charity, did it for Dakota and branched out Jim Kobe 10841 Oxborough Ave So Bloomington MN 55437 952.884.6031 Professional member American Custom Gunmakers Guild | |||
|
One of Us |
It's Charity Littleton. She has moved around a bit but is currently in Whitewood, SD. Good work! | |||
|
One of Us |
Did Charity Littleton retire? | |||
|
One of Us |
Charity has done several for me. 1st class. Phil | |||
|
One of Us |
4WD, Charity did a bolt knob for me about six weeks ago. | |||
|
one of us |
If cost and time isn't a consideration, Id suggest a hollow filigreed bolt handle by Jack Belk, they beat anything Ive ever seen... Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
one of us |
If you make a few tools to engrave bolt knobs you can do these and keep the extra money for your on pockets. I build most of my own tools and then buy a Ngraver engravers tool which is shaft driven from the same tool used to do checkering on stocks. Learn how to make the gravers sharp and equal angles on the sides. All of this info in on my USB or DVD drives. | |||
|
One of Us |
Is Belk still active in the gunsmithing world ? | |||
|
One of Us |
The crooked bastard oought to be in jail Jim Kobe 10841 Oxborough Ave So Bloomington MN 55437 952.884.6031 Professional member American Custom Gunmakers Guild | |||
|
One of Us |
Along with a whole bunch of other well paid "expert witnesses" and the lawyers who employ them. | |||
|
One of Us |
I used Bruce Farman for the checkering of the bolt handle per the recommendation of Tom Mason. Thank you Tom and the others who replied. Bruce did a beautiful job with a fast turn around.I would definitely use the services of Mr. Farman again. | |||
|
One of Us |
Bruce also does fine bolt jeweling and metal engraving. | |||
|
one of us |
Well Kobe save that tough town talk shit for someone else Im talking about metal smiths skill not your personal feelings. If I felt that way about the man Id catch him at The guid show and kick his ass! BTW you ruined a stock on one of my guns, and I never mentioned it until just now, your failure to properly protect the guns I sent you and your attitude sucked, but I wont call you names unless were face to face perhaps, but probably not...like I did with you, you just need to get over it.. Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
One of Us |
That stock you mention was damaged when I got it. You sent it to me without any mention of what you wanted. I sent it back because I didn't want to work on that POS. Being the great custom smith you are, I ask why didn't you do the work yourself. Jack Belk was a great metalsmith, I know that but the way he scammed all of those people out of some cold hard cash on the premise of cataract surgery he should have been thrown i jail alongside Bernie Maddoff Jim Kobe 10841 Oxborough Ave So Bloomington MN 55437 952.884.6031 Professional member American Custom Gunmakers Guild | |||
|
One of Us |
Ray, I'm on Kobe's side. Don't care how good bellk happens to be, I don't need a crook working on my projects. | |||
|
One of Us |
I think the sort of raised bolt knob checkering by David Miller looks real nice. Might be a little rough on the fingers though. I wonder how he does it? | |||
|
one of us |
In that case Kobe why didn't you advise me of the damage before sending the guns back???..Your just making excuses in my books,all you had to do was add a m-70 type safety..excuses, excuses, and lame at that. I sent two guns to you and you with instructions over the phone, you know that and are again lieing. You were rude and without reason other than I inquired about the guns after 3 months or so...so if you live in a glass house don't throw stones. If you have a problem with Jack, why don't you take it up with him, too much shit like this on the internet..I judge him by the quality of his work, much of which I cannot do, and its always been perfect, not interested in henhouse gossip on the internet and only one side of the stories.. Im not a custom gun smith, I build my own guns for myself,and some friends now and then, I make no claims. I don't need your BS calling a nice old 54 Win. a POS..so you attack me with that? Damn your a low life, I send you work and you reply to my good intention of sending you work, and I got stuck with shipping of about $75. You can bet your sweet ass if we ever meet face to face I will tell you what I think of that..thats no way to treat a customer.. Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
one of us |
I just stumbled back onto this site tonight after a very long absence, (decade or more perhaps) Folks are still going on about the One Eyed Jack debacle? Wow! 4WD, if you don't mind, please post some photos of Mr Farman's work. I, for one, would like to see it. | |||
|
one of us |
I was about the say the same, I havent been on here much in the last few years and we are back to the one eyed jack rifle. Not much have changed. Billy, High in the shoulder (we band of bubbas) | |||
|
One of Us |
Sorry, but it is kinda hard to forgive and forget when it hits you personally Jim Kobe 10841 Oxborough Ave So Bloomington MN 55437 952.884.6031 Professional member American Custom Gunmakers Guild | |||
|
one of us |
Jim, I can understand and that wasn't the only one of those deals from back years ago. Billy, High in the shoulder (we band of bubbas) | |||
|
One of Us |
Disappointed in you Ray, but you probably could care less. | |||
|
one of us |
In stead of building a rifle with this Dumolin action I have on my bench I think I am going to have the bolt handle checkered on. Then raffle it off with all the money going to a charity to start a midget wrestly league! Who all is in!! Billy, High in the shoulder (we band of bubbas) | |||
|
one of us |
I have a basic understanding of honesty and appreciation for fine craftsmanship but am still abit fuzzy about why anyone would checker a bolt handle on a working rifle ? That's like checkering the handle of a framing hammer, double bitted ax or splitting maul. Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship Phil Shoemaker Alaska Master guide FAA Master pilot NRA Benefactor www.grizzlyskinsofalaska.com | |||
|
One of Us |
Actually many battle hatchets/axe handles were not only checkered but extensively carved, painted and other adornments.I’ve seen many with the Celtic pattern carvings. Regarding why? I find a bald uncheckered bolt handle a little slippery in the rain or on hot days when sweating. I find a checkered bolt handle gives me a little more purchase and confidence when first working the bolt. I also like the bolt release checkered on a Mod98 or Mod70. Is it absolutely necessary? No. I also find the checkered bolt handle aesthetically pleasing rather than just having the polished round ball on the bolt handle. Just one more level of refinement. Most rifles I have seen coming from Hartman & Weiss, D’Arcy Echols, Stephen Heilmann, Gene Simillion, Duane Wiebe and the like have checkered bolt handles. I feel my rifles are naked or incomplete without a checkered bolt handle. This includes my carbon fiber / fiberglass stocked rifles. | |||
|
one of us |
Each to their own, which is the main reason we have custom rifles. But most shooters who has ever shot across the course competition with a bolt rifle day after day, or done extensive shooting like culling with one have learned to appreciate a smooth, well formed, bolt handle. Which is why framing hammers differ from blood splattered war hammers. Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship Phil Shoemaker Alaska Master guide FAA Master pilot NRA Benefactor www.grizzlyskinsofalaska.com | |||
|
One of Us |
I probably would not stir this pot if I wasn't Covid bored. First I want to make it clear that I am an admirer of good checkering, whether it be on stocks or bolt knobs. Having said that I am also of the opinion that both are cosmetic. Having used a matching pair of custom stocked uncheckered pre-war Model 70's for fifty years, not once have I ever suffered from the lack of checkering. Likewise with uncheckered bolt knobs. When you move into the realm of true custom guns it should be a given that you will get what you need, everything else is what you want or like..and that is the way it should be. FYI I took delivery on a built from the ground up custom a couple of weeks ago. It has a nice three panel checkered bolt knob. Go figure. | |||
|
One of Us |
Most custom makers I know, including myself, don't push checkered bolt handles as a money maker...In fact the client has to be the one to make the suggestion! Don't think anyone has dropped a gun because it DID NOT have checkering on the stock..but sure looks like an unfinished job without it. | |||
|
one of us |
I certainly bow to your expertise in gun building and a checkered bolt knob, like engraving, can look very nice and classy. but checkering on a stock that enables you to hold it firmly, and checkering on a movable piece of a tool are slightly different. I know from years of experience that a checkered bolt know will quickly wear blisters with a lot of shooting. Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship Phil Shoemaker Alaska Master guide FAA Master pilot NRA Benefactor www.grizzlyskinsofalaska.com | |||
|
One of Us |
Also...really f....s up the near by guns in the safe | |||
|
One of Us |
A little engraving looks nice and doesn't hurt your hand. | |||
|
One of Us |
I always try to keep rubber finger tips on my checkered bolt knobs when they are in the safe. They probably have another name, but that is what it says on the box. | |||
|
One of Us |
Bolt condoms.....horny little bastards | |||
|
One of Us |
Finger Cots Jim Kobe 10841 Oxborough Ave So Bloomington MN 55437 952.884.6031 Professional member American Custom Gunmakers Guild | |||
|
one of us |
The bolt knob rolls through my hand when operating, checkering would impede the operation. Dave | |||
|
Powered by Social Strata | Page 1 2 |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia