THE ACCURATERELOADING.COM CUSTOM RIFLE FORUM

Go
New
Find
Notify
Tools
Reply
  
Brno 21 questions
 Login/Join
 
One of Us
posted
I have a brno 21 that I need to find a semi inlet for , will any small ring mauser pattern work?
 
Posts: 800 | Registered: 20 July 2016Reply With Quote
one of us
Picture of z1r
posted Hide Post
No. You need a small ring std length 98 stock. The bottom metal will be different and early Brno's had the shotgun style trigger guard.




Aut vincere aut mori
 
Posts: 4869 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Might be hard to find a semi inlet just sitting in inventory.

Might ask around to see if anybody has a pattern stock or stock that could be used as a pattern and send it off to a duplicator.


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10181 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
I have the original stock, just looking for something with less drop. It does have the shotgun trigger guard.
 
Posts: 800 | Registered: 20 July 2016Reply With Quote
One of Us
posted Hide Post
Those model 21s are nice enough that they are deserving of custom rifle treatment. Have one of the custom makers that participate here make a custom stock for it out of a nice piece of wood.
 
Posts: 2059 | Location: Mpls., MN | Registered: 28 June 2014Reply With Quote
One of Us
posted Hide Post
quote:
Have one of the custom makers that participate here make a custom stock for it out of a nice piece of wood.

That'll cost you $4,000+, not counting the blank.
 
Posts: 20177 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Biebs:
quote:
Have one of the custom makers that participate here make a custom stock for it out of a nice piece of wood.

That'll cost you $4,000+, not counting the blank.



You are right.
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
posted Hide Post
Dennis OLson has mine old Brno 21 factory stock, He keeps it for me or copied it and sent mine back, not sure which,I will look and see. but give him a call he turns one out real close to finished unless you request otherwise...406-826-4790..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42299 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
Thanks I will try to give Dennis a call next week
 
Posts: 800 | Registered: 20 July 2016Reply With Quote
one of us
posted Hide Post
If he doesn't I will be looking for mine and let you know. I know I have a g33-40 manlicher that's close.

I just read another of your posts. You have the take off stock, Dennis can change the comb or whatever you need to make it fit you..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42299 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia