quote:

Originally posted by stoinski:
Top notch. Do the barrel and action metal have a finish on them or are they chrome molly in the raw?

quote:

Originally posted by Duane Wiebe (CG&R):
Here's a recent project using an FZH action. Rifle is shown here prior to heat treatment. The bottom metal was bent just in back of the floorplate to reduce the depth at the trigger, making a more normal grip configuration. The original bolt was cut off, shortened slightly and welded to allow use of scope.

Finally, extended tangs top and bottom. Claw mount lock up is built into the square bridge, front square ring eliminated, front foot installed on quarter rib. Original bottom metal was then modified to allow an extra round.

The barrel is a Kreiger, ordered with a 1.5" diameter at the breech end to give me material to configure an integral quarter rib and recoil lug. Swivel eye and front are soldered on.

The excellent wood was furnished by Roger Vardy and magnificent engraving by Roger Kehr. I hope Roger will contribute close up's of his work.











This full length image shows the whole project.