The Accurate Reloading Forums
One piece Bottom metal for Winchester M70 3006 Length Action

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/7971019521/m/7441010572

20 June 2023, 20:49
Vol717
One piece Bottom metal for Winchester M70 3006 Length Action
I'm going to rebarrel a nineties gun from 30/06 to 416 Ruger. I don't like the two piece bottom metal. I need bottom metal, a magaxine box, spring & follower that match. I found one at Pacific tool & Gauge. Any other suggestions?


Quick, Cheap, or Good: Pick Two
20 June 2023, 21:44
458Win
An add in the new GUNMAKER magazine shows pre-64 bottom metal makes them MMACKAY@MACKAYMFG.COM
1-509-994-1001


Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship
Phil Shoemaker
Alaska Master guide
FAA Master pilot
NRA Benefactor www.grizzlyskinsofalaska.com
20 June 2023, 23:17
squeezenhope
I would go with the Mackay.
21 June 2023, 18:48
setters5
Sunnyhill
21 June 2023, 20:00
Duane Wiebe (CG&R)
quote:
Originally posted by squeezenhope:
I would go with the Mackay.



Unless brand new...Mac Kay has yet to make a POST 64 unit..PRE 64 won't work.
22 June 2023, 06:54
Vol717
I had squirreled away a left hand express stock designed for large calibers. Midwest gun works had a one piece super grade bottom metal for it. It's a drop in for the express stock.


Quick, Cheap, or Good: Pick Two