THE ACCURATERELOADING.COM CUSTOM RIFLE FORUM

Go
New
Find
Notify
Tools
Reply
  
Mauser bullpup
 Login/Join
 
One of Us
posted
I think somebody tried to put wheels on a miscarriage.

http://www.gunbroker.com/Aucti....aspx?Item=243349150
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
One of Us
Picture of 724wd
posted Hide Post
Eeker shocker yuck


NRA Life Member

Gun Control - A theory espoused by some monumentally stupid people; who claim to believe, against all logic and common sense, that a violent predator who ignores the laws prohibiting them from robbing, raping, kidnapping, torturing and killing their fellow human beings will obey a law telling them that they cannot own a gun.
 
Posts: 992 | Location: Spokane, WA | Registered: 19 July 2005Reply With Quote
One of Us
Picture of 724wd
posted Hide Post
quote:
Originally posted by craigster:
I think somebody tried to put wheels on a miscarriage.


wheels or jackstands? great googly moogly! is that a siamese dust cover?


NRA Life Member

Gun Control - A theory espoused by some monumentally stupid people; who claim to believe, against all logic and common sense, that a violent predator who ignores the laws prohibiting them from robbing, raping, kidnapping, torturing and killing their fellow human beings will obey a law telling them that they cannot own a gun.
 
Posts: 992 | Location: Spokane, WA | Registered: 19 July 2005Reply With Quote
one of us
Picture of CZ 550
posted Hide Post
That might be the most awful thing I've ever seen.


When you need it and don't have it you'll be singing a different tune.
 
Posts: 477 | Location: Olyphant Pennsylvania | Registered: 05 September 2002Reply With Quote
one of us
posted Hide Post
Yes, that is beyond words ugly. I'd burn it before I'd sell it.


My rule of life prescribed as an absolutely sacred rite smoking cigars and also the drinking of alcohol before, after and if need be during all meals and in the intervals between them.
-Winston Churchill
 
Posts: 4741 | Location: Fresno, CA | Registered: 21 March 2003Reply With Quote
One of Us
posted Hide Post
i hate to see any rifle go into the crusher but i would not shed a tear for that thing.
 
Posts: 110 | Location: sydney australia | Registered: 22 May 2005Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
c'mon guys....there's a lot of creativity there....maybe not a thousand dollars worth but still a lot of work went into it.....

That said.....I sure wouldn't have used that beautiful piece of wood for that thing.....and BTW.....notice that I didn't bid on it!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
That was the apple of someone's eye once upon a time. Of course, so was Amy Winehouse the apple of someone's eye once upon a time.
 
Posts: 332 | Location: Annapolis,Md. | Registered: 24 January 2006Reply With Quote
One of Us
posted Hide Post
" I dont know , but it was done by an expert!!!!!!!"
 
Posts: 1382 | Location: Wyoming | Registered: 10 November 2008Reply With Quote
One of Us
Picture of James Kain
posted Hide Post
I have wondered about that myself, but I tell you what, it would look better with a synthetic stock. But I also have to admit it is a work of art done by someone who knows what there doing. Although still ugly as sin.


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
 
Posts: 934 | Location: North Anson Maine USA | Registered: 27 October 2008Reply With Quote
One of Us
Picture of littlecanoe
posted Hide Post
Ruined a nice stick of wood!
 
Posts: 230 | Registered: 25 November 2005Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by littlecanoe:
Ruined a nice stick of wood!
tu2


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
posted Hide Post
That looks a lot like a Bullpup Springfield Bolt rifle General Patton designed for the Tank Troops...


DOUBLE RIFLE SHOOTERS SOCIETY
 
Posts: 16134 | Location: Texas | Registered: 06 April 2002Reply With Quote
One of Us
Picture of James Kain
posted Hide Post
quote:
Originally posted by N E 450 No2:
That looks a lot like a Bullpup Springfield Bolt rifle General Patton designed for the Tank Troops...

But I bet those looked better. :P


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
 
Posts: 934 | Location: North Anson Maine USA | Registered: 27 October 2008Reply With Quote
One of Us
posted Hide Post
That has been for sale on and off for at least 3 years now. Still looks just as bad after all this time.
Don
 
Posts: 1087 | Location: Detroit MI | Registered: 28 March 2006Reply With Quote
One of Us
posted Hide Post
gheyer than boy george humping a unicorn under a rainbow.


DRSS
Kreighoff 470 NE
Valmet 412 30/06 & 9.3x74R
 
Posts: 1993 | Location: Denver | Registered: 31 May 2010Reply With Quote
One of Us
Picture of James Kain
posted Hide Post
quote:
Originally posted by Don Markey:
That has been for sale on and off for at least 3 years now. Still looks just as bad after all this time.
Don
yuck I wonder if its the guy who made it? Who else wonders if the the person who made it realizes that its an epic fail?


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
 
Posts: 934 | Location: North Anson Maine USA | Registered: 27 October 2008Reply With Quote
One of Us
posted Hide Post
There were a few of these in the UK in the 1980s, think they were made in France.

They got good reviews in the journals, but that doesn't mean a lot Mad
 
Posts: 139 | Registered: 15 March 2008Reply With Quote
one of us
Picture of D Humbarger
posted Hide Post
Well thats one way to increase magazine capasity to about 20 or 30 rounds. Roll Eyes



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
 
Posts: 8351 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Lincs Stalker:
There were a few of these in the UK in the 1980s, think they were made in France.

They got good reviews in the journals, but that doesn't mean a lot Mad


The french, it all makes sense now.
Don
 
Posts: 1087 | Location: Detroit MI | Registered: 28 March 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia