Go | New | Find | Notify | Tools | Reply |
One of Us |
I started this project twenty years ago, and after doing the barrel work, put it aside until recently. It started as a 03/A3 action and I acquired 03 bottom metal that was then slightly reshaped and polished. The barrel is a #1 Mcgowen contour in classic 7x57 Mauser. The action was sent to Michael Scherz for a set of his custom Talley bases and the bolt handle. It has a Timney trigger and will probably get one of Jim Kobe's two position safeties. The stock started as a $100 blank of English that I got years ago when I was in Jack Burres blank a month club. A friend with a pantograph cut the stock. The stock was fit and finished by a retired friend who shall remain nameless unless he gives me permission, and a beautiful job he did, inside and out! He worked around a few problem areas and fit the ebony for-end, Dakota swivel bases, Neidner buttplate and a small grip cap that I got from Dressels. I will have it matte blued and checkered in a nice 22 lpi point pattern and it will be ready to go. If someone can help me, I have some pictures I took that I can e-mail to them if they could add them to this post. I would really appreciate it. My photography skill are poor, but you will still be able to see how nice it has come out so far! Thanks! Lee. DRSS(We Band of Bubba's Div.) N.R.A (Life) T.S.R.A (Life) D.S.C. | ||
|
one of us |
No photo Doug Humbarger NRA Life member Tonkin Gulf Yacht Club 72'73. Yankee Station Try to look unimportant. Your enemy might be low on ammo. | |||
|
One of Us |
Cant exist if there is no photo. Come on, we NEED to see it. Von Gruff. | |||
|
One of Us |
I need someone who can receive my email photo's and put them here please! DRSS(We Band of Bubba's Div.) N.R.A (Life) T.S.R.A (Life) D.S.C. | |||
|
One of Us |
Email them to me and I will get them posted tomorrow afternoon. Nathaniel Myers Myers Arms LLC nathaniel@myersarms.com www.myersarms.com Follow us on Instagram and YouTube I buy Mauser actions, parts, micrometers, tools, calipers, etc. Specifically looking for pre-WWII Mauser tools. | |||
|
One of Us |
On the way FALG, Thanks! DRSS(We Band of Bubba's Div.) N.R.A (Life) T.S.R.A (Life) D.S.C. | |||
|
One of Us |
Your welcome! Nathaniel Myers Myers Arms LLC nathaniel@myersarms.com www.myersarms.com Follow us on Instagram and YouTube I buy Mauser actions, parts, micrometers, tools, calipers, etc. Specifically looking for pre-WWII Mauser tools. | |||
|
One of Us |
Thanks again to FalGrunt. I'm trying to figure out what parts would look best case colored to set off the matte blue of the barreled action. I'm thinking... Bases and rings, grip cap, and the two position safety/shroud. I am not sure if the swivel bases would be right, colored. What do Y'all think? DRSS(We Band of Bubba's Div.) N.R.A (Life) T.S.R.A (Life) D.S.C. | |||
|
one of us |
That is a mightly righteous looking rifle what color are you going to paint it ? Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship Phil Shoemaker Alaska Master guide FAA Master pilot NRA Benefactor www.grizzlyskinsofalaska.com | |||
|
One of Us |
Very nice. A 7x57 Springfield, that should be quite a Texas hunting rifle. Mike | |||
|
One of Us |
very nice. are you going to put sights on it? if the buttplate wasn't checkered i'd say color case it too. | |||
|
One of Us |
You know, you'd think that with the Talley detachables that I would iron sight it, and originally that was my intention. It was going to be a English flavored, express sighted rifle. Jim and Mike might remember the springfield .458 that I brought to the last big bore shoot, it was very professionally built with gorgeous work, since it was straight American Classic, I decided to follow the same general theme with this one, sort of to "pair". I kind of like the slick barrel trimness on the 7x57, so I have some thinking to do. If the CC would show up on the checkered BP, I'm with you, Jim, but I think blue will work. DRSS(We Band of Bubba's Div.) N.R.A (Life) T.S.R.A (Life) D.S.C. | |||
|
One of Us |
Very nice rifle. Too bad it's the wrong chambering for a Springfield. | |||
|
One of Us |
nice!!!!... if it handles and shoots like your .458, it'll be worth the wait!!... go big or go home ........ DSC-- Life Member NRA--Life member DRSS--9.3x74 r Chapuis | |||
|
One of Us |
That rifle is THE posterboy for perfect grain flow in the wood. Very nice. Bailey Bradshaw www.bradshawgunandrifle.com I'm in the gun buildin bidness, and cousin....bidness is a boomin | |||
|
one of us |
Same smith did this one for me. Needs blue, checkering: NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS. Shoot & hunt with vintage classics. | |||
|
One of Us |
Thanks Bailey! That was probably the best $100 I ever spent! DRSS(We Band of Bubba's Div.) N.R.A (Life) T.S.R.A (Life) D.S.C. | |||
|
One of Us |
I dont feel so bad about my Ruger #1 project Ive had kicking around for about 6-7 years now.. And that stock is motivating me to "git er done" as I have some english for it as well.. Very nice rifle!!! Thanks for sharing! AK-47 The only Communist Idea that Liberals don't like. | |||
|
One of Us |
Boy, I take back everything I've ever thought about the looks of an 03 Springfield action. That thing is gorgeous! The bolt handle and the Talleys on the bridges change it's appearance completely! | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia