THE ACCURATERELOADING.COM CUSTOM RIFLE FORUM

Go
New
Find
Notify
Tools
Reply
  
KURZ SPRINGFIELD
 Login/Join
 
One of Us
posted
Here is a new project just getting started
rough but it has a lot of potential
going to be a 250-3000



Michael J
 
Posts: 485 | Location: Lakewood Colorado | Registered: 17 February 2008Reply With Quote
One of Us
posted Hide Post
Great start. Keep the pics coming!


Jim
 
Posts: 1210 | Location: Memphis, TN | Registered: 25 January 2008Reply With Quote
One of Us
Picture of 724wd
posted Hide Post
suddenly the front of my pants are fitting tighter!


NRA Life Member

Gun Control - A theory espoused by some monumentally stupid people; who claim to believe, against all logic and common sense, that a violent predator who ignores the laws prohibiting them from robbing, raping, kidnapping, torturing and killing their fellow human beings will obey a law telling them that they cannot own a gun.
 
Posts: 992 | Location: Spokane, WA | Registered: 19 July 2005Reply With Quote
One of Us
Picture of drhall762
posted Hide Post
I have read about a few of these and seen pictures of them. I think they are very cool. Can't wait to see the end result.


Dave

In 100 years who of us will care?
An armed society is a polite society!
Just because they say you are paranoid doesn't mean they are not out to get you.
 
Posts: 899 | Location: Ammon, NC | Registered: 31 December 2013Reply With Quote
One of Us
Picture of richj
posted Hide Post
probably a camera illusion but the bottom bolt looks like a banana
 
Posts: 6547 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
Picture of ab_bentley
posted Hide Post
What's going on with the rear bridge, did you fill it in?


Adam


______________________

Ammo, you always need more.
 
Posts: 463 | Location: Dresden, Ohio | Registered: 09 January 2012Reply With Quote
One of Us
posted Hide Post
More pictures please! Great stuff.
 
Posts: 1304 | Location: N.J | Registered: 16 October 2004Reply With Quote
One of Us
posted Hide Post
Yes Bolt handle is ugly it will be replaced by one of Duane Wiebe's.
Yes rear bridge is being reshaped and will be square bridged.
Lot's of work ahead going to make new custom bottom metal as well. The one that is there is just to make sure everything works.

Thanks for looking


Michael J
 
Posts: 485 | Location: Lakewood Colorado | Registered: 17 February 2008Reply With Quote
one of us
posted Hide Post
Banana ? Spherical distortion is seen first at the edges of the field making things appear curved. Wide angle lenses often have the problem.
 
Posts: 7636 | Registered: 10 October 2002Reply With Quote
One of Us
posted Hide Post
Nice start. Have you foreseen any issues with the bolt internals? I remember a similar project done on a Mauser a few years back and he ended up getting the bolt too short (goal was to shoot .45acp) and it wouldn't cock or something. Definitely didn't work correctly and I think he abandoned it.

I've got an O3-A3 action that might be a good candidate for this treatment when I clear the first two pages of my To-Do list.
 
Posts: 714 | Location: Milwaukee, Wisconsin | Registered: 09 October 2003Reply With Quote
One of Us
posted Hide Post



Here's the bolt of the one I have here. The bolt was done a little different.
Don
 
Posts: 1087 | Location: Detroit MI | Registered: 28 March 2006Reply With Quote
One of Us
Picture of ab_bentley
posted Hide Post
Holy crap that thing is tiny. What caliber?

Adam


______________________

Ammo, you always need more.
 
Posts: 463 | Location: Dresden, Ohio | Registered: 09 January 2012Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by ab_bentley:
Holy crap that thing is tiny. What caliber?

Adam

218 bee
 
Posts: 1087 | Location: Detroit MI | Registered: 28 March 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Don Markey:
quote:
Originally posted by ab_bentley:
Holy crap that thing is tiny. What caliber?

Adam

218 bee


As my little boy says,

"I want. I want!"


Nathaniel Myers
Myers Arms LLC
nathaniel@myersarms.com
www.myersarms.com
Follow us on Instagram and YouTube

I buy Mauser actions, parts, micrometers, tools, calipers, etc. Specifically looking for pre-WWII Mauser tools.
 
Posts: 1527 | Location: Ohio | Registered: 06 June 2010Reply With Quote
One of Us
posted Hide Post
Nathaniel you have a saw and welder don't you? Have fun!
Don
 
Posts: 1087 | Location: Detroit MI | Registered: 28 March 2006Reply With Quote
One of Us
posted Hide Post
[QUOTE]Originally posted by michaelj:
Yes Bolt handle is ugly it will be replaced by one of Duane Wiebe's.
Yes rear bridge is being reshaped and will be square bridged.
Lot's of work ahead going to make new custom bottom metal as well. The one that is there is just to make sure everything works.[QUOTE]
I have pics of a square bridge ed Lapour's did for a friend of mine 35w around here somewhere. I'll try to find then for you. He removed the 3rd lug like yours is, made a nice trim bridge.
Don
 
Posts: 1087 | Location: Detroit MI | Registered: 28 March 2006Reply With Quote
One of Us
posted Hide Post
Thanks Don.
Is that an original Winchester shroud. I have one laying around I was thinking of fitting to mine.


Michael J
 
Posts: 485 | Location: Lakewood Colorado | Registered: 17 February 2008Reply With Quote
One of Us
posted Hide Post
There was a young man in the SLC area named Steve Fotou I met in the late 1980's. He was the best gunsmith/machinist I have ever met.

He wanted a benchrest rifle, but was on a budget. He shortened a 98 Mauser about like this, to just fit the6 PPC cartridge. Made a solid bottom single shot out of it, fit a third lever to the trigger, and had it down to the sub-2oz pull. He was competitive.
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by michaelj:
Thanks Don.
Is that an original Winchester shroud. I have one laying around I was thinking of fitting to mine.


No a gentry. Now I need to fit the thing up if I can figure out Dennis's directions and find or make the missing pieces.
Don
 
Posts: 1087 | Location: Detroit MI | Registered: 28 March 2006Reply With Quote
One of Us
posted Hide Post



Rear bridge done by Ed LaPour
 
Posts: 1087 | Location: Detroit MI | Registered: 28 March 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Don Markey:
Nathaniel you have a saw and welder don't you? Have fun!
Don


Ha ha! Maybe someday when I have some free time.


Nathaniel Myers
Myers Arms LLC
nathaniel@myersarms.com
www.myersarms.com
Follow us on Instagram and YouTube

I buy Mauser actions, parts, micrometers, tools, calipers, etc. Specifically looking for pre-WWII Mauser tools.
 
Posts: 1527 | Location: Ohio | Registered: 06 June 2010Reply With Quote
One of Us
posted Hide Post
Don,

Is that Winstons 35W?
 
Posts: 328 | Location: Oklahoma | Registered: 20 June 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Nick Hughes:
Don,

Is that Winstons 35W?


Yep I had to take pics while I had it in the shop. He should know better than to have me work on his stuff. I keep photos.
Don
 
Posts: 1087 | Location: Detroit MI | Registered: 28 March 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia