Go | New | Find | Notify | Tools | Reply |
Moderator |
Years ago a gunsmith friend barreled a P-14 as a 500 Jefferey. I had planned to do the magazine and feed work myself but instead it's just gathered dust in the safe for years. Looking for suggestions for a smith who is up to making a magazine and can work the feed rails for reliable feeding and ejection. I'm not looking for a high grade custom, just a reliable working rifle. I discussed the work with a smith a few years ago but have lost his contact information. I know there are a few smiths that should be up to this work. __________________________________________________ The AR series of rounds, ridding the world of 7mm rem mags, one gun at a time. | ||
|
One of Us |
Hello Paul, If nome of the members here have a good lead for you, the American Custom Gunmakers Guild ACGG would be a excellent place to start. Personally I would never use anyone that is not a member. They must have a high level of craftsmanship needed just to be considered for membership. JP Formerly JPaul | |||
|
One of Us |
A-Square would have been the obvious choice, but they're no longer in business. | |||
|
One of Us |
Did you build that Tolman skiff? | |||
|
One of Us |
Key is a proper mag box (in addition to rail work) "Evil is powerless if the good are unafraid" -- Ronald Reagan "Ignorance of The People gives strength to totalitarians." Want to make just about anything work better? Keep the government as far away from it as possible, then step back and behold the wonderment and goodness. | |||
|
One of Us |
It seems to me that in the past I have read a number of threads here about the very fine work that a gentleman by the name of Nick Hughes does on enfield rifles. If i recall correctly he practices in Oklahoma someplace. Do a search. KJK | |||
|
Moderator |
Yes I did __________________________________________________ The AR series of rounds, ridding the world of 7mm rem mags, one gun at a time. | |||
|
one of us |
Jim Wisner wrote the book on that conversion so to speak. Find 'Gunmaker' magazine issues #79 & #80 . Mr Wisner wrote an extensive article on that conversion. Craftsman | |||
|
One of Us |
If anyone could find these magazine articles, I would be interested also. Roger | |||
|
One of Us |
Nick Hughes is the MAN, if he isn't buried. He did a lot of work on my M17 Rigby. | |||
|
One of Us |
I do believe those articles could be retrieved though the ACGG, on a CD, Contact them thru ACCGG.org Jim Kobe 10841 Oxborough Ave So Bloomington MN 55437 952.884.6031 Professional member American Custom Gunmakers Guild | |||
|
One of Us |
Good reference. Note the name of the 416 in the title http://www.weaponsmith.com/ima...d/wisner/feeding.pdf "Evil is powerless if the good are unafraid" -- Ronald Reagan "Ignorance of The People gives strength to totalitarians." Want to make just about anything work better? Keep the government as far away from it as possible, then step back and behold the wonderment and goodness. | |||
|
one of us |
Duane Weibe right here on AR, there just is no better.. Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia