Well I haven't seen a topic with posts in this section...perhaps I have not looked hard enough but I decided to start one anyway.
This is my Match AR. A BushMaster lower with all kinds of goodies on the inside !!! The 3 big ones though are as follows.
1) The D-Site !!! Made by "dsiteman"
2) A Compass Lake 2 stage trigger
3) A Kreiger Barrel
The rest are little things that I will post if ya really want to know but those are the big three. A lot of thanks goes to the dsiteman as he sold me this rifle which will always be more accurate than me.
So without further wait...here is my rifle




Now we have pictures of the all powerful all SEEING D-SITE !!!



A Beautful Kreiger Barrel



A Custom made sling by Leslie Tam in Hawaii. I would highly recomend getting in contact with Mr.Tam via his website if you want a high quality sling


Random Pictures



So there are the picts of my rifle. I hope you guys enjoyed a peek. If there is another area of military weapons and picts please forgive me.

Now you know what to do with the rear half of those cut in half garand or M14 receivers.

Hello D Humbarger,
Actually I had given that some thought in the beginning(used to buy three cut receivers for 15.00 and use them for paper weights!) but turned out to be more hassle than necessary. Sight is mfg. from 4140 alloy and produced on machine center for the A4 and for Rem. 700 rear bridge arrangement. Internals are original M1/M14 parts. Tolerances are held much tighter than on the originals. Drawback is the sight is heavy, but on match rifles not a negative.

Nicely prepared tool.