Go | New | Find | Notify | Tools | Reply |
one of us |
What is the minimum legal length for a shotgun barrel in Canada for a non-restricted firearm? Thanks, Dave One morning I shot an elephant in my pajamas. How he got into my pajamas I'll never know. - Groucho Marx | ||
|
one of us |
Presently I have seen as short as 8.5" manufactured barrel unrestricted shotgun. You cannot modify it to less than about 18" yourself, but if it is factory made, you can go down pretty short! I doubt much less than 8.5" would be practical. 375 Ruger- The NEW KING of the .375's!! | |||
|
One of Us |
There may be loopholes allowing a gun like Gatehouse described, but I wouldn't chance it. The way the regs are worded you can't posess a firearm with a barrel less than 18.5 inches, and overall length of the firearm must be at least 26 inches. The regs are in those stupid metric measurements, the numbers I gave are very close equivalents. Guns not meeting these requirements are classified as either restricted or prohibited. | |||
|
one of us |
bushman, Explain then, the non-resticted status of the Winchester M94 Trapper. Gatehouse is correct, a manually operated firearm which is manufactured with a barrel length of less than 18 inches is unrestricted providing the overall length is still over 26". I cannot shorten a standard model 94 barrel to 16" and call it a Trapper. However, I can rebarrel a trapper Model with a 16 inch barrel. Are regulations not just great?! Regards, Bill. | |||
|
One of Us |
I'm just going strictly by what it says in a brochure I got from the CFC. Our ass-backwards Canadian gun laws are full of loopholes and idiotic exceptions and special clauses. | |||
|
One of Us |
Isn't an m-1 carbine restricted because of barrel length?? the chef | |||
|
One of Us |
Yes the M-1 carbine is restricted because of its length, but they were selling some M-1 with 19 inch barrels which were not. I own a remington 870 with a 12.5 inch barrel and its prefectly legal. Like bushman says Canadian gun laws are full of loophopes and idiot. short and fat and hard to get at, hit like a hammer and never been hit back. | |||
|
one of us |
Thanks for the responses. Am I safe in assuming that a Winchester Model 12, with the barrel cut back to 22 inches is legal? Dave One morning I shot an elephant in my pajamas. How he got into my pajamas I'll never know. - Groucho Marx | |||
|
one of us |
Yup, that's legal. You can chop one yourself back to about 18" 375 Ruger- The NEW KING of the .375's!! | |||
|
one of us |
These shotguns are both non restricted in Canada. They were manufactured like this. There is a dispute wiht the CFC about the status of the pistol grip one, but presently it's still unrestricted. 375 Ruger- The NEW KING of the .375's!! | |||
|
One of Us |
I sifted through what info I had at home and on the computer, and found this link http://www.nfa.ca/content/view/148/199/ I hope is helpful, as this is a murky part of our miserable Firearms Act and Regulations.I personally would not go out of the house with one like this, without having knowledge and a photocopy of the relevant info from the Act/Regulations. That could save you some grief, if a Conservation or Police officer happens to get a look at your firearm and doesn't like it.. They may not be aware of what is and is not a non-restricted firearm, and you may have to educate them....politely... to save yourself some grief. The author of the info on the link passed away in Sept/07, so I don't know who at the NFA would be attempting to fill his role in these matters | |||
|
one of us |
Thanks, that pretty well answers my question. And I though that our gun laws were nutty! Dave One morning I shot an elephant in my pajamas. How he got into my pajamas I'll never know. - Groucho Marx | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia