THE ACCURATERELOADING.COM PISTOL SHOOTING FORUM


Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
WST Vs Bullseye
 Login/Join
 
One of Us
posted
Been using WST for 45acp for years but ran out and have Bullseye left. Any comments? Thanks smoker1


The beauty of the Second Amendment is that it will not be needed until they try to take it.
--Thomas Jefferson

 
Posts: 868 | Location: NYS | Registered: 25 July 2005Reply With Quote
One of Us
posted Hide Post
BE has been more or less the standard powder for 45 for a good many years. standard load was always 3.5 gr & a 230 gr for target work (need softer recoil spring) or 5 gr and a 230 for field work (regular recoil spring)
 
Posts: 13466 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
one of us
Picture of arkypete
posted Hide Post
I use 4.5 grains of Bullseye with either a NEI 210 SWC or a 200 grain Saeco SWC. I used these for Bullseye matchs and field work.
Jim


"Whensoever the General Government assumes undelegated powers, its acts are unauthoritative, void, and of no force." --Thomas Jefferson

 
Posts: 6173 | Location: Richmond, Virginia | Registered: 17 September 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia