The Accurate Reloading Forums
Merkel Sights

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/760101804/m/813107815

01 August 2006, 04:51
Norman Conquest
Merkel Sights
Here are some pictures of the Ivory front sight J.J. installed on my 470.Also a target with the 500G./ cast.

<a href="http://photobucket.com" target="_blank"><img src="http://i57.photobucket.com/albums/g222/randys_pictures/Picturesfromcamera074.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

<a href="http://photobucket.com" target="_blank"><img src="http://i57.photobucket.com/albums/g222/randys_pictures/Picturesfromcamera073.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

<a href="http://photobucket.com" target="_blank"><img src="http://i57.photobucket.com/albums/g222/randys_pictures/Picturesfromcamera071.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

<a href="http://photobucket.com" target="_blank"><img src="http://i57.photobucket.com/albums/g222/randys_pictures/Picturesfromcamera068.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>
01 August 2006, 04:55
Norman Conquest
here are some pictures of the ivory front sight J.J. installed on my 470. also a target with the 500G./ cast.










Never mistake motion for action.
01 August 2006, 05:22
Norman Conquest
Please forgive the upper post;still a novice at posting pictures.BTW,these are averaging 1600MV.They're gas check so more velocity is possible,(62.0G. Max.),but they seem to regulate well with this charge.So far I've only experimented with 5744 powder with this cast bullet.


Never mistake motion for action.
01 August 2006, 19:15
degoins
very nice sights and group......it dont get much better than that Smiler


DRSS
01 August 2006, 20:29
MacD37
NC, what mold did you cast these bullets from? The target is fabulous, and would make a very nice deer load for my double as well.
About the rear sight, does the front bead sit on the bottom of the aperture of the rear sight, or is the top of the front sight level with the top of the back sight for proper sight picture? If it sits on the bottom, I'd have opened the rear sight up to a wide "V"! OH! I see now the standing sight IS a wide "V"! I didn't see that on my first look at the picture! Roll Eyes
I'm not sure I'm going to be well enough to get down to CAMP COOLEY in this heat, so I may take both my Merkel doubles up to JJ for this sight install, and I will try your 470NE cast load as well! LOOKS GOOD! beer


....Mac >>>===(x)===> MacD37, ...and DUGABOY1
DRSS Charter member
"If I die today, I've had a life well spent, for I've been to see the Elephant, and smelled the smoke of Africa!"~ME 1982

Hands of Old Elmer Keith

01 August 2006, 22:19
N E 450 No2
Mac
Do not let the heat stop you from comming to the DRSS hunt. If it is too hot we can sit in the airconditioning and drink Gin and Tonic [or what ever]. beer

We can just throw down some corn in the front yard and if a pig comes up we can shoot it through the window. BOOM Big Grin


DOUBLE RIFLE SHOOTERS SOCIETY
02 August 2006, 00:14
577NitroExpress
Ditto what Tony said, Mac, we'll get you your own cooler, fan, A/C unit, whatever you need.


577NitroExpress
Double Rifle Shooters Society
Francotte .470 Nitro Express




If stupidity hurt, a lot of people would be walking around screaming...

02 August 2006, 00:38
700 nitro
dont know about you guys but its 48 or 120 degrees out right now up here in canada
02 August 2006, 01:05
MacD37
quote:
Originally posted by 700 nitro:
dont know about you guys but its 48 or 120 degrees out right now up here in canada


I just checked the temp in Toronto, and it is 36C, or 95F which is Hot for any place in Canada! I don't think it has ever been 120F anyplace in Canada! The only place in the lower 48 that reaches 120F is death valley, the hottest place in north America! Confused


....Mac >>>===(x)===> MacD37, ...and DUGABOY1
DRSS Charter member
"If I die today, I've had a life well spent, for I've been to see the Elephant, and smelled the smoke of Africa!"~ME 1982

Hands of Old Elmer Keith

05 August 2006, 01:37
Dangerous Dave
I am very interested in a similar site for my Mekel. Please let me know who to contact,who's JJ?


If your parents didn't have any children chances are you won't either.
05 August 2006, 01:49
400 Nitro Express
Dave:

JJ is J. J. Perodeau, a Liege trained gunmaker at Champlin Firearms in Enid, OK. www.champlinarms.com (580) 237-7388. J. J. is a double rifle guy and does first class work.
------------------------------------------------
"Serious rifles have two barrels, everything else just burns gunpowder."