THE ACCURATERELOADING.COM DOUBLE RIFLES FORUM

Go
New
Find
Notify
Tools
Reply
  
Lead cast bullets
 Login/Join
 
One of Us
Picture of retreever
posted
Anyone shooting ldead cast bullets for practice thru their doubles??

Mike


Michael Podwika... DRSS bigbores and hunting www.pvt.co.za " MAKE THE SHOT " 450#2 Famars
 
Posts: 6768 | Location: Wyoming, Pa. USA | Registered: 17 April 2003Reply With Quote
one of us
Picture of Palmer
posted Hide Post
Not shooting them but I have some to give away.

They are 30.33mm long and 12 mm diameter. 1.2 inches long by .466 inches dia.

They have three grooves filled with some type of grease.

I got them from Butch when I had a 470. I have 49 of them.

Anyone who will reimburse the shipping can have them.


ALLEN W. JOHNSON - DRSS

Into my heart on air that kills
From yon far country blows:
What are those blue remembered hills,
What spires, what farms are those?
That is the land of lost content,
I see it shining plain,
The happy highways where I went
And cannot come again.

A. E. Housman
 
Posts: 2251 | Location: Mo, USA | Registered: 21 April 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by retreever:
Anyone shooting ldead cast bullets for practice thru their doubles??

Mike


Yes, .500 x 3", .470 and .500/450
 
Posts: 1700 | Location: USA | Registered: 04 January 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Palmer:
Not shooting them but I have some to give away.

They are 30.33mm long and 12 mm diameter. 1.2 inches long by .466 inches dia.

They have three grooves filled with some type of grease.

I got them from Butch when I had a 470. I have 49 of them.

Anyone who will reimburse the shipping can have them.


.466 doesn't sound right for a .470, is it a typo and they are .476 dia.? If so I could use them and pay you the postage, just keep me from turning the lead pot or or casting on some hot day when I don't want to do so.
 
Posts: 1700 | Location: USA | Registered: 04 January 2005Reply With Quote
one of us
posted Hide Post
Retriever,

I cast gas checked 9,3 and .476" bullets which I use in 9,3x74R and .470 NE. Also make .377" and .459" projectiles for the .375 H&H and the .458 AR respectively. I use Lar45's Carnauba Red Lube.

They work pretty well and are a bunch cheaper to shoot than Woodleighs.


Mike

--------------
DRSS, Womper's Club, NRA Life Member/Charter Member NRA Golden Eagles ...
Knifemaker, http://www.mstarling.com
 
Posts: 6199 | Location: Charleston, WV | Registered: 31 August 2002Reply With Quote
One of Us
Picture of Rojovin
posted Hide Post
Hello: Just started to use lead casts in my newly done-up JJ project. Merkel 2020 Express o/u in 8X57JRS scoped with Leupold 1.5x-5x shoots like a dream. 180gr with 28.0 gr of IMR 4198. Next project is cast boolits 9,3X74R for my Heym M55 Keep you posted, more to follow.
 
Posts: 96 | Location: Long Island New York | Registered: 14 December 2007Reply With Quote
One of Us
Picture of Rojovin
posted Hide Post
Hi: Just got a batch of 9,3mm from a caster and plan to load for my Merkel 140. SS and for my Heym M55. I have just got the boolits in the other day and need to get to the work-bench to set things up. Nice casts.more to follow....rjs

NRA Endowment-Life Member
SCI Life Member
DRSS Member (very Happy to be here,Thanks for bringing me on board.)
 
Posts: 96 | Location: Long Island New York | Registered: 14 December 2007Reply With Quote
one of us
Picture of Palmer
posted Hide Post
quote:
.476 dia.?


AfricanHunter - I could have mis-spoke (sort of like Hellery did). I will measure them tonite when I get home.

Allen


ALLEN W. JOHNSON - DRSS

Into my heart on air that kills
From yon far country blows:
What are those blue remembered hills,
What spires, what farms are those?
That is the land of lost content,
I see it shining plain,
The happy highways where I went
And cannot come again.

A. E. Housman
 
Posts: 2251 | Location: Mo, USA | Registered: 21 April 2002Reply With Quote
One of Us
posted Hide Post
i cast them for the 470 with 40 gr of 5744
 
Posts: 13466 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
One of Us
posted Hide Post
I highly recommend cast bullets for big bore doubles, if you can find ones that regulate in your rifle. My Heym 470 NE really likes LBT 425 gr LFN/GC bullets from Cast Performance Bullets. With an appropriate charge of AA 5744 (around 42 gr), they shoot at about 1600 fps, regulate perfectly and are very pleaseant to shoot. With the 150 yard sight leaf up, these reduced loads impact at the top of the bead a 50 yards and in the middle of the bead at 100 yards. It's really cool to cover an 8-inch steel plate at 100 yards with the bead and hit it every time! In my Heym these bullets can also be pushed to normal velocities (i.e. above 2000 fps) with H4350, I 4350 or other suitable powder and still regulate well which gives a good practice load that is almost full power and very inexpensive. I've also shot Mt Baldy Bullets 510gr FNGC bullets with good success in full-power loads, but they don't regulate as well in reduced loads as the LBT 425's do. they tend to shoot apart quite a bit until the velocity passes 2000 fps. Again, as full power loads they are cheap and good practice. Most of the rounds through my 470 have been cast loads.
 
Posts: 62 | Registered: 10 August 2006Reply With Quote
one of us
Picture of Palmer
posted Hide Post
AfricanHunter
The cast lead bullets I have measure 476 to 477. I must have mistyped the dimension earlier.

If you want them pm me your address and I will ship them to you.


ALLEN W. JOHNSON - DRSS

Into my heart on air that kills
From yon far country blows:
What are those blue remembered hills,
What spires, what farms are those?
That is the land of lost content,
I see it shining plain,
The happy highways where I went
And cannot come again.

A. E. Housman
 
Posts: 2251 | Location: Mo, USA | Registered: 21 April 2002Reply With Quote
One of Us
Picture of Rojovin
posted Hide Post
I am ISO loads for 9,3X74R using a 272 gr gas checked cast boolits.Can anyone advise as to powder and charges. Thanks in advance.
 
Posts: 96 | Location: Long Island New York | Registered: 14 December 2007Reply With Quote
one of us
posted Hide Post
I shoot 400gr cast bullets, [I cast them out of linotype they are a Flat Nose style for the 45/70, lyman mold] in my 450 No2.

I load 50gr of IMR 4198 with 15 grains of poly.

Velocity is @ 1822fps.

They regulate well and hit with the sights at 50 yards.

I also shoot some cast bullets in my 450/400 3 1/4" double.

It is @300gr lead bullet that I got from Mike Brady I load it with 44gr of IMR 4198 and 12 grains of poly.

Velocity is estimated to be around 1700fps.


DOUBLE RIFLE SHOOTERS SOCIETY
 
Posts: 16134 | Location: Texas | Registered: 06 April 2002Reply With Quote
One of Us
posted Hide Post
330grn Hard, gas checked bullets ahead of 45grns AA5744 regulates and shoots well from my 500/416. Flatens bushpigs with style- would work for game up to kudu- just haven't got there yet.

360grn bullet ahead of 35grns AA5744 shoots ok for speed practice but doesn't regulate well - but the softer bullets and less powder makes a more economical load!
 
Posts: 3026 | Location: Zimbabwe | Registered: 23 July 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia