The Accurate Reloading Forums
NORTH FORK BULLETS
18 December 2010, 13:56
HonkeyNORTH FORK BULLETS
Hello all,
I am going to try North Fork flat point solids and cup point solids for feeding my 470 NE Searcy.
A few questions,
1 I seem to remember a discount was given a while ago for AR members??
2 I plan to work up to the same load I have used for very successfully with Hornady DGX bullets.
106 grains of IMR 4831 with a Federal 215 primer. What loads have you guys used???
Thanks again,
Jamie
NRA Life
DRSS
Searcy 470 NE
The poster formerly known as Uglystick
18 December 2010, 16:16
CCMDocI'm a big fan of NF bullets as are many here.
I believe the discount was for a limited time and ended in November.
Srose and Michael458 tested the NF in a double. Check the thread about "Double Bullet of the Future" - the load they use is listed on the photos of the target or body of the post.
NRA Lifer; DSC Lifer; SCI member; DRSS; AR member since November 9 2003
Don't Save the best for last, the smile for later or the "Thanks" for tomorow
18 December 2010, 16:35
HonkeyThanks CMCDoc,
Would you mind coppying and pasting the link??
I am terrible at using the search function..
THANKS!!
NRA Life
DRSS
Searcy 470 NE
The poster formerly known as Uglystick
18 December 2010, 19:45
michael458quote:
Originally posted by Honkey:
Thanks CMCDoc,
Would you mind coppying and pasting the link??
I am terrible at using the search function..
THANKS!!
Honkey
Just below this thread, which is now at the top. Go down about midway on the page or you can.......
http://forums.accuratereloadin...831089541#3831089541Michael
http://www.b-mriflesandcartridges.com/default.htmlThe New Word is "Non-Conventional", add "Conventional" to the Endangered Species List!
Live Outside The Box of "Conventional Wisdom"
I do Not Own Any Part of Any Bullet Company, I am not in the Employ Of Any Bullet Company. I do not represent, own stock, nor do I receive any proceeds, or monies from ANY BULLET COMPANY. I am not in the bullet business, and have no Bullets to sell to you, nor anyone else.
20 December 2010, 22:25
Bob NisbetI over-bought on reloading supplies and posted a few items in the classifieds. They include 500 grain SWIFT A-Frame bullets, 500 Grain Barnes Solids, and both new and once fired Norma brass.
I still,.heve these items.
Any interest?
Bob Nisbet
DRSS & 348 Lever Winchester Lover
Temporarily Displaced Texan
If there's no food on your plate when dinner is done, you didn't get enough to eat.
21 December 2010, 04:29
HonkeyThanks,
But I am pretty well stocked up on brass and I only want for North Fork bullets.
Cheers
NRA Life
DRSS
Searcy 470 NE
The poster formerly known as Uglystick
21 December 2010, 15:21
tetonkaNorth Fork will have a booth at the Dallas Safari Club Jan. 6-9. They may have some show specials or Contact John Koegler at
North Fork for Tech. Info. The NF Flat Nose and Cup Solids are "Bore Riders" and NF. suggests that you use 1 & 1/2 grains LESS powder to start. I am using the North Fork solids (both types) in my 450/400 NE 3 inch now with great success. Currently testing with RL#15 and a foam wad I am down
almost 4 grains for the same speed with North Forks versus Woodleighs. 66 grains of RL15 and 400 gr. NF. solids produce 2050 fps. and 69 1/2 of RL15 produce 2060 with the Woodleigh
400gr soft nose in my K Gun. I have no experience with the 470 NE. Pressure with the North Forks appears to be lower too. Accuracy is great.
Be careful, follow all reloading rules,
Good luck and good shooting
Tetonka
DRSS 450/400 NE 3 IN. K-Gun
21 December 2010, 16:11
HonkeyTHANKS!!
I ordered some last night.
NRA Life
DRSS
Searcy 470 NE
The poster formerly known as Uglystick
21 December 2010, 19:56
GarByMOST of the time, NF's do indeed regulate/attain correct velocity, at a grain or 2 less than the Woodies....been my experience anyway.
Gary
DRSS
NRA Lifer
SCI
DSC