Looking for someone to make a mold for my .577 BPE. Bore size is .580 and the groove size is .598. I'd like to shoot paper patch about 560gr. Can anyone help? Thanks

Standard Production Bullet Mould Manufacturers

Lee Precision, Inc.
4275 Highway U
Hartford, WI 53027
tel: 262-673-3075
http://www.leeprecision.com
-lathe bored; aluminum; standard & custom designs

Lyman Products Corporation
475 Smith Street
Middletown, CT 06457
tel: 800-225-9626
http://www.lymanproducts.com/lymanproducts/index.htm
-cherry cut; iron; standard designs

Magma Engineering Co.
P.O. Box 161
Queen Creek, AZ 85242
http://www.magmaengr.com
-cherry cut; iron; standard designs

RCBS
http://www.rcbs.com
tel: 800.533.5000
e-mail: rcbs.tech@atk.com
-cherry cut; iron; standard designs

Redding/Saeco
1089 Starr Road
Cortland, NY 13045
Tel: (607) 753-3331
http://www.redding-reloading.com
-cherry cut; iron; standard designs


Custom & Semi-custom Bullet Mould Makers

Applegate Gunsmithing - Rob Applegate (retired)
P.O. Box 58
Yoncalla, OR 97499
-cherry cut; brass; Applegate standard designs

Ballard bullet Moulds – Tom Ballard (retired?)
Box 298
Clancy, MT 59634
Tel: 406-933-8217
-cherry cut; iron; custom designs

Ballist-Cast - Peter Niess
tel: 1-877-486-6546
http://www.ballisti-cast.com/
-cherry cut; iron; Ballisti-Cast standard designs (semi-custom)

Brooks Tru--Bore Bullet Moulds - Steve Brooks
1610 Dunn Ave.
Walkerville, Montana 59701
Tel: 406-782-5114
-lathe bored; cast iron; Brooks standard & custom designs (135$ to your door)

Cast Bullet Engineering - Jim Allison
Australia
http://www.users.bigpond.com/JIM.CBE.htm
???; brass; CBE standard designs (semi-custom)

D. Mos Bullet Moulds - David Mos
Work: 307-587-4914 (Ballard Rifle)
P.O. Box 2876
Cody, WY 82414
-lathe bored; iron; custom designs

Doughty Bullet Moulds – Richard “Old Vic†Doughty
e-mail: doughty@blackfoot.net
P.O. Box 36
Plains, MT 59859
-CNC milled, lathe bored, and cherry cut designs; standard & custom designs. Brass & iron, 1 to 4 cavity (6 cavity coming).

Eagan Moulds – Donald V. Eagan
PO Box 196
Benton, PA 17814
Tel: 570-925-6134
-cherry cut; brass; Eagan standard designs & custom (nose pour)

Hoch Custom Bullet Moulds - Dave Farmer
910 N. Delaware
Roswell, NM 88201
tel: 505-627-1933
-lathe bored; iron; custom & semi-custom designs (nose pour)

JT Bullet Moulds - Jeff Tanner
23 Passingham Avenue
Billericay, Essex CM11 2TD
United Kingdom
tel: 0044 (0) 1277 653456
http://www.jt-bullet-moulds.co.uk
E-mail: jeff@jt-bullet-moulds.co.uk
-brass, aluminum if over 2†dia; ball and belted ball moulds

LBT - Veral Smith
Div. of F.I.G. ENT. INC,
HCR 62 BOX 145
Moyie Springs, ID 83845
http://www.leverguns.com/lbt/index.htm
e-mail: LBTisAccuracy@Imbris.net
-lathe bored; aluminum; LBT designs (semi-custom)

Lee Precision, Inc.
4275 Highway U
Hartford, WI 53027
tel: 262-673-3075
http://www.leeprecision.com
-lathe bored; aluminum; LEE standard & custom designs

Mountain Mold - Dan Lynch
E-Mail: mountainmolds@mcleodusa.net
http://www.mountainmolds.com
Pocatello, ID
Note: AKA: MtnGun (on Cast Boolits site)
-lathe bored; aluminum, brass, iron; custom designs (based on standard configurations)


NEI Handtools - Patty Melander
PO Box 370356
El Paso, TX 79937-0356
tel: 915-772-0259
e-mail: nei@columbia-center.org; Joel jfragoso63@sbcglobal.net; 915-274-3204
http://www.neihandtools.com
-cherry cut; aluminum, meehanite (type of cast iron); NEI & custom designs

Old West Bullet Moulds – Ken Chapman (retired)
P.O. Box 519
Flora Vista, NM 87415
-cherry cut & lathe bored ; brass; Old West designs

Paul Jones Precision Bullet Moulds - Paul Jones
4901 Telegraph Rd. Los Angeles, Ca. 90022
Tel: (323) 262-1510
E-mail: customer-service@pauljonesmoulds.com
http://www.pauljonesmoulds.com/
-lathe bored; cast iron; Jones & custom designs

Pioneer Products – Leeth Moulds
254 Johnsville Brookville Road
Brookville, OH 45309
Tel: 937-833-2865 / 937-839-9741
-cherry cut; cast iron; Leeth & custom designs

Rapine Bullet Mould Manufacturing
9503 Landis Lane
East Greenville, PA 18041
tel: (215) 679-5413
http://plantfloor.com/pa/rapinebulletmouldcompany.htm
-cherry cut; 2024-T3 aluminum; Rapine designs – semi-custom

Victory Molds – Steve & Gigi Fotou
http://www.victorymolds.com
tel: 1-801-295-1773
e-mail: steve@victorymolds.com
-lathe bored; 11L17 or S7 steel; custom designs


That should get you started! Compliments of the cast bullet folks.

Noone could ask for more than that Snowwolfe. Thanks

Lovely list! Thank you.

I'd like to plug Ballisti-Cast. They are the successors to H&G and make terrific molds.

Casper:
The guys over on the British Militaria forums have been struggling with over-size bores in the .577 Snider rifle for years, and have developed a couple of bullets which work. One has a driving band, or heel, like a .22 rimfire bullet. The guy who designed and supplies the mold seems to own the site, and posts as 'Coyote'. Head over to http://p223.ezboard.com/fbritishmilitariaforumsfrm19?page=1 and trawl around. Lots of other good stuff in there too.

I would recommend Paul Jones or Steve Brooks. I have had moulds from most of the people listed. I do not believe David Mos is still making moulds. Although I do have three of his and believe them to be the best I have ever had in my possession. My Jones and Brooks moulds have cast over 10,000 bullets each and they are still true. FWIW

Dutch