press for the .450 No2 NE

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/760101804/m/4801016841

25 January 2011, 14:01

Rusty

press for the .450 No2 NE

On your side of the pond you should be able to find Norma 203B. It is just another batch of RL-15. It may be a bit more consistant from batch to batch.

Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member
"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”

25 January 2011, 22:21

boha

Thank you Gentlemen! Imagine a simple q like mine generated such an avalanche of posts..

I just ordered a Lee Classic Cast. The Hornady 480 grs I'll pick up tomorrow.

Here's the beauty to the right of a tiny little 500 Jeffery

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
J. Lane Easter, DVM

A born Texan has instilled in his system a mind-set of no retreat or no surrender. I wish everyone the world over had the dominating spirit that motivates Texans.– Billy Clayton, Speaker of the Texas House

No state commands such fierce pride and loyalty. Lesser mortals are pitied for their misfortune in not being born in Texas.— Queen Elizabeth II on her visit to Texas in May, 1991.

26 January 2011, 21:18

ron vella

I originally bought the Lee Classic Cast Press but got tired of having to unscrew the seating die a half-turn after seating 500 grain Hornadys. Then I found a (discontinued) RCBS Big Max at a gun show. It's a monster but it handles the .450 #2 with room to spare!

26 January 2011, 23:30

ledvm

quote:
but got tired of having to unscrew the seating die a half-turn after seating 500 grain Hornadys.

Screw the seating plunger in further and leave the die out a little further.