THE ACCURATERELOADING.COM DOUBLE RIFLES FORUM

Go
New
Find
Notify
Tools
Reply
  
Ghost Rings
 Login/Join
 
One of Us
posted
I am really interested in these sights. I just need to know the concept behind these.


Life Is For Service
DRSS
 
Posts: 254 | Location: South Florida | Registered: 26 August 2008Reply With Quote
one of us
posted Hide Post
T,

Believe I've noted some confusion on the board between ghost rings and peep sights, especially for double rifles.

Subject to correction, my understanding is that a ghost ring is a relatively large round aperture on the rifle as far back as the geometry of the firearm permits. The only other part of the sight is the front bead. When you look through the aperture, your eye automatically centers the front bead and you place it where you want to hit on the quarry.

The peep sight is also placed as close to the eye as possible. On a double, JJ Perodeau at Champlins replaces the screw that holds the top lever that breaks the barrels with one that has a folding peep mounted on it. By contrast, Bailey Bradshaw in his new doubles, builds a flip-up peep into the rib just at the standing breech. You look through that peep and line up the normal backsight with the front bead down in the vee. The optical effect of the peep is to permit entry of only rays of light that strike the center of your pupil and those, even with our aging eyes, focus better so you get a much clearer sight picture.

Either works, but strikes me that the ghost ring is a little simpler although maybe not as good for shooting over 100 yards.

Regards,
Tim
 
Posts: 1323 | Location: Washington, DC | Registered: 17 March 2003Reply With Quote
One of Us
posted Hide Post
I think that explains it. Thank You very Much.
George


Life Is For Service
DRSS
 
Posts: 254 | Location: South Florida | Registered: 26 August 2008Reply With Quote
One of Us
Picture of BwanaCole
posted Hide Post
quote:
although maybe not as good for shooting over 100 yards.

Regards,
Tim


The ghost ring on my service issue M16 worked just fine out to 460m just fine for many, many years. Wink


H. Cole Stage III, FRGS
ISC(PJ), USN (Ret)



"You do not have a right to an opinion. An opinion should be the result of careful thought, not an excuse for it."

Harlan Ellison

" War is God's way to teach Americans geography." Ambrose Bierce
 
Posts: 378 | Registered: 28 September 2010Reply With Quote
One of Us
Picture of AK_Stick
posted Hide Post
the M-16 rear sights are "peep sights" not a ghost ring.


Only Angels and Aviators have wings
 
Posts: 263 | Location: The frozen north, between deployments | Registered: 03 July 2006Reply With Quote
One of Us
posted Hide Post
an say bwana is you got some great eyes!


The things you see when you don't have a gun.
NRA Endowment Life Member
Proud father of an active duty
Submariner... Go NAVY!

 
Posts: 436 | Location: Lynchburg, Home of Texas Independence | Registered: 28 July 2007Reply With Quote
One of Us
posted Hide Post
That's friggin all, lol.


The things you see when you don't have a gun.
NRA Endowment Life Member
Proud father of an active duty
Submariner... Go NAVY!

 
Posts: 436 | Location: Lynchburg, Home of Texas Independence | Registered: 28 July 2007Reply With Quote
One of Us
posted Hide Post
a ghost ring usually has a slightly larger aperature, and doesn't have a large ring to shield light. The ring on mine are about 1/16" at the most with a 3/32 aperature. When you look through it, since it is out of focus and fairly small, it creates a fuzzy ring. The key is it also creates a dot in the optical center of the ring that is discernable, but only if you are looking for it. Your eye will pick it up and easily center the front sight with the "optical dot".

It's a fast sight that is suprisingly accurate and provides an open sight picture. It's my choice of sights on my own rifles.


Bailey Bradshaw

www.bradshawgunandrifle.com



I'm in the gun buildin bidness, and cousin....bidness is a boomin
 
Posts: 568 | Location: Diana, TX | Registered: 10 January 2007Reply With Quote
one of us
posted Hide Post
Yes , fast and accurate ,100 yds is no problem at all.
My favorite is a 1/8" square front and a 3/16" to 1/4" rear opening with a thin [ghost] ring.Normally you hardly are aware of the ring.
 
Posts: 7636 | Registered: 10 October 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia