THE ACCURATERELOADING.COM DOUBLE RIFLES FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Double Rifles    a few more pictures of rising bite rifle actions
Go
New
Find
Notify
Tools
Reply
  
a few more pictures of rising bite rifle actions
 Login/Join
 
One of Us
Picture of peterdk
posted
Dear All

here is a few more pictures of our Rifle action, for you to enjoy.











i hope you enjoy this as much as we enjoy making them.

best

peter
 
Posts: 1336 | Location: denmark | Registered: 01 September 2007Reply With Quote
One of Us
posted Hide Post
Peter,

Looks great.... beer

What is involved in getting one of your DRs imported to the USA?


DRSS &
Bolt Action Trash
 
Posts: 860 | Location: Arizona + Just as far as memory reaches | Registered: 04 February 2007Reply With Quote
One of Us
Picture of BrettAKSCI
posted Hide Post
Beautiful! Will anyone be in Reno or will you be tied up making guns?

Brett


DRSS
Life Member SCI
Life Member NRA
Life Member WSF

Rhyme of the Sheep Hunter
May fordings never be too deep, And alders not too thick; May rock slides never be too steep And ridges not too slick.
And may your bullets shoot as swell As Fred Bear's arrow's flew; And may your nose work just as well As Jack O'Connor's too.
May winds be never at your tail When stalking down the steep; May bears be never on your trail When packing out your sheep.
May the hundred pounds upon you Not make you break or trip; And may the plane in which you flew Await you at the strip.
-Seth Peterson
 
Posts: 4551 | Location: Alaska | Registered: 21 February 2008Reply With Quote
One of Us
Picture of PSmith
posted Hide Post
Yes, another request to please let us know where you will be in Reno (if you will be there). Thanks.


Paul Smith
SCI Life Member
NRA Life Member
DSC Member
Life Member of the "I Can't Wait to Get Back to Africa" Club
DRSS
I had the privilege to fire E. Hemingway's WR .577NE, E. Keith's WR .470NE, & F. Jamieson's WJJ .500 Jeffery
I strongly recommend avoidance of "The Zambezi Safari & Travel Co., Ltd." and "Pisces Sportfishing-Cabo San Lucas"

"A failed policy of national defense is its own punishment" Otto von Bismarck
 
Posts: 2545 | Location: The 'Ham | Registered: 25 May 2007Reply With Quote
One of Us
Picture of peterdk
posted Hide Post
quote:
Originally posted by AzGuy:
Peter,

Looks great.... beer

What is involved in getting one of your DRs imported to the USA?


as far as i understand it, a FFL dealer's license.

best

peter
 
Posts: 1336 | Location: denmark | Registered: 01 September 2007Reply With Quote
One of Us
Picture of peterdk
posted Hide Post
Brett and PSmith

we wil not be in reno this year, as we are stuck at the factory making guns, we would also like it to be a presentation of our full line and there is not enough hours in the day for us to get that ready to the show.
Hopefully next year and if we are in the states with guns, i will be sure to tell you here, so if you are nearby, you can come around for a private show.

best

peter
 
Posts: 1336 | Location: denmark | Registered: 01 September 2007Reply With Quote
one of us
posted Hide Post
Peter,

A sidelock, rising bite double, but the strikers are not bushed?

Seems as if it would be a useful and quality touch. GRateful for your comment.

Regards, Tim
 
Posts: 1323 | Location: Washington, DC | Registered: 17 March 2003Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by peterdk:
Brett and PSmith

we wil not be in reno this year, as we are stuck at the factory making guns, we would also like it to be a presentation of our full line and there is not enough hours in the day for us to get that ready to the show.
Hopefully next year and if we are in the states with guns, i will be sure to tell you here, so if you are nearby, you can come around for a private show.

best

peter


Hi Peter, I would suggest that if you want to come to SCI next year, try to buddy up with another exhibitor that has already been there. To get a good booth and setup the 1st run can be very costly like around $20,000.00 USD as a single exhibitor. Would love to see you there I have some close friends that live in the Reno area and would be more than happy to put you up for your stay.
 
Posts: 108 | Location: USA, Surrey, Loire France  | Registered: 03 March 2008Reply With Quote
new member
posted Hide Post
quote:
Originally posted by Tim Carney:
Peter,

A sidelock, rising bite double, but the strikers are not bushed?

Seems as if it would be a useful and quality touch. GRateful for your comment.

Regards, Tim


One of the last things that is done when building a DR is drilling the firing pins and counter boring the bushes. It prevents misalignment. They are spotted from the center of the finished barrels.
If you look at the third picture of the rear of the action you can see no firing pin (striker) holes.
Those are working alignment marks on the face that you can see.
 
Posts: 20 | Location: England | Registered: 16 June 2007Reply With Quote
One of Us
Picture of peterdk
posted Hide Post
quote:
Originally posted by peterdk:
quote:
Originally posted by AzGuy:
Peter,

Looks great.... beer

What is involved in getting one of your DRs imported to the USA?


as far as i understand it, a FFL dealer's license.

best

peter


I have just read my reply and it is not clearly what I meant to say. I implied that YOU had to be an FFL, I did not mean that...

You order a Rifle from us and when it is ready it is delivered to an FFL of your nomination by courier after clearing US customs and paying the US customs fees.
Or you can contact US customs, pay the importation duty by showing them your invoice, and then collect your rifle from England if you prefer.

Best Peter
 
Posts: 1336 | Location: denmark | Registered: 01 September 2007Reply With Quote
One of Us
Picture of peterdk
posted Hide Post
quote:
Originally posted by Mark Neal:
quote:
Originally posted by Tim Carney:
Peter,

A sidelock, rising bite double, but the strikers are not bushed?

Seems as if it would be a useful and quality touch. GRateful for your comment.

Regards, Tim


One of the last things that is done when building a DR is drilling the firing pins and counter boring the bushes. It prevents misalignment. They are spotted from the center of the finished barrels.
If you look at the third picture of the rear of the action you can see no firing pin (striker) holes.
Those are working alignment marks on the face that you can see.


That is correct. The strikers are indeed bushed, the actions you are looking at are just not at that stage of completion. The locks only have assembly screws fitted etc.etc.

Best

Peter
 
Posts: 1336 | Location: denmark | Registered: 01 September 2007Reply With Quote
One of Us
posted Hide Post
If your looking for someone to field test that great looking double rifle please feel free to send it to me in Canada . Keep up the good work looking forward to any more pictures you post .
 
Posts: 551 | Location: British Columbia Canada  | Registered: 02 January 2006Reply With Quote
one of us
Picture of husky
posted Hide Post
Peterdk,
Looks decent!

-but it ain't a California Rigby jumping




 
Posts: 1134 | Location: Sweden | Registered: 28 December 2003Reply With Quote
one of us
posted Hide Post
Mark and Peter,
Thanks for the clarification. Glad to learn something new.

Regards, Tim
 
Posts: 1323 | Location: Washington, DC | Registered: 17 March 2003Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Double Rifles    a few more pictures of rising bite rifle actions

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia