I have a new Savage 10FP in .223 and almost a full pound of H322 that I used in my .222.
Is this too fast for my .223?
Does anyone have some loads for this?
I have Winchester Brass and 50 gr Sierra Blitz on hand.

quote:

---

Originally posted by Jim Dannels:
I have a new Savage 10FP in .223 and almost a full pound of H322 that I used in my .222.
Is this too fast for my .223?
Does anyone have some loads for this?
I have Winchester Brass and 50 gr Sierra Blitz on hand.

---

I have used H322 in my bolt 223 and it works fine....try 24.0 with the 50 gr. bullet and work up a little ...322 is accurate but not as high velocity as H335 in my guns.....use Rem. 7 1/2 or similar primer.....RIFLE..shows 24.5 with 50 at 3321fps/55,177psi in 24in. bbl.1in12 enjoy and good luck and good shooting!!!

Thank You for the tip. I will try that load.