THE ACCURATERELOADING.COM SMALL CALIBER FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Using Target Knobs
 Login/Join
 
one of us
posted
Well, I just got my first set of target knobs, but haven't used them yet. However, before I start, I have a really stupid question to ask you guys.
Let's say my gun is zeroed at 100 and I'm shooting a hog at 300. According to my ballistics chart, the bullet will drop 8" at 300. Do I raise my scope 32 clicks (1 click = 1/4" at 100), or do I raise it 11 clicks because at 300 yds 1 click will equal 3/4"? I think I know the answer, but guys have told me both answers and I just want to make sure from those of you who TRUELY use them.
 
Posts: 445 | Location: Connellsville, PA | Registered: 25 April 2002Reply With Quote
one of us
Picture of Big Bore
posted Hide Post
In actuality, the click does not move the impact 1/4 inch at 100 yards, but 1/4 minute of angle at 100 yards. That works out to real close to 1/4 inch, but does lead to this confusion. Use the 1/4 MOA and you see exactly what is happening. One MOA at 100 yards is roughly 1", 200 yards, 2", and 300 yards, 3 inches. So, if one click moves the impact 1/4 MOA, then you are moving the impact 1/4 MOA at all ranges, so at 300 yards, 1/4 of 3" is 3/4 inch. Each click now moves the impact 3/4 inch at 300 yards. Since 8" at 300 yards is 2.66 MOA (8 divided by 3), you need to put in 2.66 MOA of adjustment, with 1 click equal to 1/4 MOA, you need between 10 (2.5 MOA) and 11 clicks (2.75 MOA), just like you said.
While all this may make it sound confusing, if you get rid of the idea of inch movement and use MOA, it works out at all ranges and for me anyway, becomes much less confusing.
 
Posts: 641 | Location: Indiana, U.S.A. | Registered: 21 October 2000Reply With Quote
one of us
posted Hide Post
jethrow, If you know the muzzle velocity of your load and also the BC of the bullet you're shooting and will email me. I'll generate you a click chart for that load. Saves a lot of time and components!!!! GHD
 
Posts: 2495 | Location: SW. VA | Registered: 29 July 2002Reply With Quote
<Boyd Heaton>
posted
This is a click chart I made for my big gun...It is in M.o.a.....  - If I have a range to my target is 900 yards.I look at the chart.It says 17.7 M.O.A.....That comes out to 70.8 clicks which I round up to 71 .25 INCH CLICKS..

[ 05-12-2003, 05:55: Message edited by: Boyd Heaton ]
 
Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by jethro:
Well, I just got my first set of target knobs, but haven't used them yet. However, before I start, I have a really stupid question to ask you guys.
Let's say my gun is zeroed at 100 and I'm shooting a hog at 300. According to my ballistics chart, the bullet will drop 8" at 300. Do I raise my scope 32 clicks (1 click = 1/4" at 100), or do I raise it 11 clicks because at 300 yds 1 click will equal 3/4"? I think I know the answer, but guys have told me both answers and I just want to make sure from those of you who TRUELY use them.

I set the clickers at the point of aim at 100 yards, which is 2.5 inches for the 6mm-284. I then use a chart with 'inches high at 100 yards' for various distances, and raise the 100 yard point of aim to compensate for the distance.

Tom
 
Posts: 14700 | Location: Moreno Valley CA USA | Registered: 20 November 2000Reply With Quote
one of us
posted Hide Post
Jethro
This is not a stupid question.
Bigbore is correct. If you can creat a drop chart in M.O.A. you are way better off.

If not try this simple formulae.

Range X .01047 (moa conversion). Divide drop by answere.
Multiply by 4 to get clicks.

Or. 300 x .01047=3.141
8 inches drop divided by 3.141 =2.547
2.547 x 4= 10.188 clicks

10 clicks not 11 clicks!!
Surprised??
This is another reason that most guys shouldn,t be shooting big game at long range.
That .00047 difference is enough to miss a deer at 600 yards.
This only works if your scope is true moa calibrated but should be close enough for gophers.

Have fun!
Jamie
 
Posts: 322 | Location: B.C. Canada | Registered: 31 March 2003Reply With Quote
one of us
posted Hide Post
Thanks guys, that clears everything up.

GD, do you use a program for the chart or do you just calculate it by hand?
 
Posts: 445 | Location: Connellsville, PA | Registered: 25 April 2002Reply With Quote
one of us
posted Hide Post
Last night I took X-man's formula and punched it into Microsoft Excel to make a handy chart. It worked great! Best of all, I can use this for other calibers. Just change my drop numbers and it will automatically calculate the clicks. The other good thing is that with Excel you can print as small as you want. Nice feature to use when you want to shrink it, laminate it, and tape it to your stock.

Thanks guys!
 
Posts: 445 | Location: Connellsville, PA | Registered: 25 April 2002Reply With Quote
one of us
posted Hide Post
jethrow, I use a program!! You want me to do math? Seriously, My dad said on the way to my graduation ceremony, "Son, I don't know why you're getting a degree in Dairy Science! You haven't done anything but work on rifles and shoot groundhogs for 4 years!!! GHD
 
Posts: 2495 | Location: SW. VA | Registered: 29 July 2002Reply With Quote
one of us
posted Hide Post
GHD:
Darn I missed those classes when I was in college!
Must have been asleep at registration (every term)!
I would have really enjoyed higher education if I had known that you could work on your rifles and shoot groundhogs for credit.
Maybe I could re enroll.
You must have gone to the very best school!

muck

[ 05-14-2003, 08:24: Message edited by: muck ]
 
Posts: 1052 | Location: Southern OHIO USA | Registered: 17 November 2001Reply With Quote
one of us
posted Hide Post
Hey jethro, I'd strongly encourage you to "verify" your Drop Chart values by actually shooting some groups on paper at the distances you intend to shoot.

Occasionally the calculations from mathmatical models come fairly close - other times they don't. The only real way to create a valid Drop Chart is through actual shooting the exact bullet and load you intend to use at a specific distance and record the change needed to compensate for the drop.

By the way, don't be surprised if you need to add some "Windage" which is not caused by the wind.

Good luck to you.
 
Posts: 9920 | Location: Carolinas, USA | Registered: 22 April 2001Reply With Quote
one of us
posted Hide Post
Hot Core.
That's the best advice I've heard in a long time!
Some bullets don't work very well with existing computer models.
Certain Hornady SSTs, Nosler Bts, and Swift Sciroccos can be right off the computer map at ranges beyond 300 yards.

Jamie
 
Posts: 322 | Location: B.C. Canada | Registered: 31 March 2003Reply With Quote
one of us
posted Hide Post
Righto!!
 
Posts: 926 | Location: pueblo.co | Registered: 03 December 2002Reply With Quote
<Boyd Heaton>
posted
x-man....just how much does being one click off at 700 change your point of impact?????
 
Reply With Quote
one of us
posted Hide Post
jethro, I always try the loads out against the charts I generate and for the 222Mag, 243, 25-06,6x284 and 260 and 7mmMag, what I have tried has been remarkably close on my 400 yard range. The 6x284 was tried at 500 and was dead on but that is the only one that I've seen it tried on over 400. Around here it's hard to get a place to shoot those 7-800 or 1000 yard ones!
MUCK, I graduated from VA TECH, class of '78! I never got any credits from my gun exploits but I didn't let shool interfere with my education!! [Big Grin] [Big Grin] GHD
 
Posts: 2495 | Location: SW. VA | Registered: 29 July 2002Reply With Quote
one of us
posted Hide Post
Boyd,
In theory bullet impact would change about 1.8 inches at 700 yards.
I'm not sure but I guess you are calling me on " 1 click missing the deer at 600 yards". In itself that would be an exageration of course, but you were the only one that called me on it.
I spent several years trying to become a good long range hunter only to fail at my quest. I guess my point is that unless you have actually tried it there is no descibing just how difficult and variable your chances are for making a good hit.

Jamie
 
Posts: 322 | Location: B.C. Canada | Registered: 31 March 2003Reply With Quote
one of us
Picture of Big Bore
posted Hide Post
And don't forget the freaking WIND. You can know exactly what your bullet does every inch of the way out to 1000 yards, and it all goes to hell in a hand basket because a gust of wind catches the bullet 200 yards from the muzzle and blows your group all over the country side. I've never been able to dope wind well, and what it will do to a .50 BMG bullet at 500 yards is truly humbling, much less what it will do to lighter bullets at equal or longer range. Wind is maddening enough with paper punching, but doing it with live game where the stakes are much, much higher, I won't even think about it past 300 yards if there is even so much as a whisper of wind.
 
Posts: 641 | Location: Indiana, U.S.A. | Registered: 21 October 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia